View source for I/O Settings (Edge)

{{E}}
The [[:Category:Stations#Turbine_stations|Turbine range of stations]] have configurable I/O's, i.e. you can choose if an I/O should be used as an Input or as an Output. By default all I/O's are set as Inputs. 
* When configured to be an '''Input''', the input actions are configured from [[Direct Access Key & Ringlist Settings (Edge)|Direct Access Key Settings]].
* When configured to be an '''Output''', the output operation is configured from the [[Relay Settings (Edge)|Edge Controller in an Edge system]], but locally in the station when used in SIP mode.

By default an input is triggered by a closing contact (referred to as "NO - Normally Open"). The input can be configured as "Input NC" (NC - Normally Closed) instead. (Requires firmware 8.1.3.0 or later).

Enable [[Advanced Configuration Mode (Edge)|Advanced Configuration]] mode, and select '''Edge Configuration > I/O''' from the menu
[[File:Edge IOs.PNG|thumb|left|500px|I/O settings web page]]
<br style="clear:both;" />

For each of the six I/O pins the options are:
* '''Input''' (default)
* '''Input NC'''
* '''Output''' 


===Use Inputs As Key Matrix===
If there is a need for more than the 6 inputs available, it is possible to use the '''Use Inputs As Key Matrix''' and combine inputs as in a diode matrix, and in this way create more DAKs. 
By for example using 3 inputs it is possible to get 7 DAKs. 

The different options are:

*2 Inputs (input 1-2, DAK 1-3)
{| border="1" 
| align="center" style="background:#ffd400;"|'''Input 2'''
| align="center" style="background:#ffd400;"|'''Input 1'''
| align="center" style="background:#ffd400;"|'''DAK key triggered'''
|-
| 0||1||DAK1
|-
| 1||0||DAK2
|-
| 1||1||DAK3
|-
| 0||0||Last DAK released
|}



*3 Inputs (input 1-3, DAK 1-7):
[[File:IO as matrix.png|thumb|right|500px|Diode matrix when using 3 inputs to activate 7 DAK keys]] 
{| border="1" 
| align="center" style="background:#ffd400;"|'''Input 3'''
| align="center" style="background:#ffd400;"|'''Input 2'''
| align="center" style="background:#ffd400;"|'''Input 1'''
| align="center" style="background:#ffd400;"|'''DAK key triggered'''
|-
| 0||0||1||DAK1
|-
| 0||1||0||DAK2
|-
| 0||1||1||DAK3
|-
| 1||0||0||DAK4
|-
| 1||0||1||DAK5
|-
| 1||1||0||DAK6
|-
| 1||1||1||DAK7
|-
| 0||0||0||Last DAK released
|}


*4 Inputs (input 1-4, DAK 1-15):
{| border="1" 
| align="center" style="background:#ffd400;"|'''Input 4'''
| align="center" style="background:#ffd400;"|'''Input 3'''
| align="center" style="background:#ffd400;"|'''Input 2'''
| align="center" style="background:#ffd400;"|'''Input 1'''
| align="center" style="background:#ffd400;"|'''DAK key triggered'''
|-
| 0||0||0||1||DAK1
|-
| 0||0||1||0||DAK2
|-
| 0||0||1||1||DAK3
|-
| 0||1||0||0||DAK4
|-
| 0||1||0||1||DAK5
|-
| 0||1||1||0||DAK6
|-
| 0||1||1||1||DAK7
|-
| 1||0||0||0||DAK8
|-
| 1||0||0||1||DAK9
|-
| 1||0||1||0||DAK10
|-
| 1||0||1||1||DAK11
|-
| 1||1||0||0||DAK12
|-
| 1||1||0||1||DAK13
|-
| 1||1||1||0||DAK14
|-
| 1||1||1||1||DAK15
|-
| 0||0||0||0||Last DAK released
|}

The DAK actions are configured from [[Direct Access Key & Ringlist Settings (Edge)|Direct Access Key Settings]].



[[Category: IC-EDGE Configuration]]