Difference between revisions of "1-1b. AlphaWeb - Getting started (solution)"
From Zenitel Wiki
Line 3: | Line 3: | ||
__NOTOC__ | __NOTOC__ | ||
− | ==PC Settings:== | + | ===PC Settings:=== |
*Configure your computer to have IP address 169.254.1.1 | *Configure your computer to have IP address 169.254.1.1 | ||
*Connect the PC to the exchange ethernet port 0 using a standard ethernet cable | *Connect the PC to the exchange ethernet port 0 using a standard ethernet cable | ||
− | ==Login:== | + | ===Login:=== |
*Use an internet browser like Internet Explorer to access AlphaWeb by typing in the exhcange default IP address: 169.254.1.5 | *Use an internet browser like Internet Explorer to access AlphaWeb by typing in the exhcange default IP address: 169.254.1.5 | ||
*Default username: '''''admin''''' | *Default username: '''''admin''''' | ||
*default password: '''''alphaadmin''''' | *default password: '''''alphaadmin''''' | ||
− | ==Configure eth1:== | + | ===Configure eth1:=== |
*In AlphaWeb go to ''System Configuration -> Interfaces'' | *In AlphaWeb go to ''System Configuration -> Interfaces'' | ||
*Set the IP address on eth1 to 10.1.10.1 and the Subnet Mask to 255.255.0.0 | *Set the IP address on eth1 to 10.1.10.1 and the Subnet Mask to 255.255.0.0 | ||
*Press ''Save'' | *Press ''Save'' | ||
− | ==Configure filters:== | + | ===Configure filters:=== |
*In AlphaWeb go to ''System Configuration -> Filters'' | *In AlphaWeb go to ''System Configuration -> Filters'' | ||
*Enable the ports for AlphaWeb and AlphaPro for ''Eth1'' | *Enable the ports for AlphaWeb and AlphaPro for ''Eth1'' |
Revision as of 16:59, 16 March 2011
PC Settings:
- Configure your computer to have IP address 169.254.1.1
- Connect the PC to the exchange ethernet port 0 using a standard ethernet cable
Login:
- Use an internet browser like Internet Explorer to access AlphaWeb by typing in the exhcange default IP address: 169.254.1.5
- Default username: admin
- default password: alphaadmin
Configure eth1:
- In AlphaWeb go to System Configuration -> Interfaces
- Set the IP address on eth1 to 10.1.10.1 and the Subnet Mask to 255.255.0.0
- Press Save
Configure filters:
- In AlphaWeb go to System Configuration -> Filters
- Enable the ports for AlphaWeb and AlphaPro for Eth1
- Press Save
- Press Apply
- Press Yes