Difference between revisions of "1-1b. AlphaWeb - Getting started (solution)"
From Zenitel Wiki
(→Login:) |
(→Configure eth1:) |
||
Line 12: | Line 12: | ||
*default password: '''''alphaadmin''''' | *default password: '''''alphaadmin''''' | ||
− | ===Configure eth1 | + | ===Configure eth1=== |
*In AlphaWeb go to ''System Configuration -> Interfaces'' | *In AlphaWeb go to ''System Configuration -> Interfaces'' | ||
*Set the IP address on eth1 to 10.1.10.1 and the Subnet Mask to 255.255.0.0 | *Set the IP address on eth1 to 10.1.10.1 and the Subnet Mask to 255.255.0.0 |
Revision as of 17:05, 16 March 2011
PC Settings
- Configure your computer to have IP address 169.254.1.1
- Connect the PC to the ethernet port 0 of the AlphaCom using a standard ethernet cable
Login
- Use an internet browser like Internet Explorer to access AlphaWeb by typing in the exhcange default IP address: 169.254.1.5
- Default username: admin
- default password: alphaadmin
Configure eth1
- In AlphaWeb go to System Configuration -> Interfaces
- Set the IP address on eth1 to 10.1.10.1 and the Subnet Mask to 255.255.0.0
- Press Save
Configure filters:
- In AlphaWeb go to System Configuration -> Filters
- Enable the ports for AlphaWeb and AlphaPro for Eth1
- Press Save
- Press Apply
- Press Yes