Actions

Difference between revisions of "1-3a. IP Stations – Master Stations (solution)"

From Zenitel Wiki

(→‎Configure the AlphaCom XE)
Line 44: Line 44:
  
 
* Send the changes to the AlphaCom
 
* Send the changes to the AlphaCom
−
* Check that the display on the station shows the correct number and name<br><br>
 
  
−
===DAK keys===
 
−
*In AlphaPro go to '''Users & Stations''' and select physical number 3
 
−
*Click the '''DAK''' button in the lower left corner
 
−
* Select the '''DAK 1-10''' tab, and insert the following:
 
−
[[File:1-2a solution2.PNG|thumb|left|300px|AlphaPro: Users & Stations -> DAK]]
 
−
<br style="clear:both;" />
 
−
 
−
*Press DAK1 and observe that 416 Reception is called
 
−
*Press DAK2 and observe that 6540 T. Edison is called
 
−
<br style="clear:both;" />
 
−
 
−
=== Additional information ===
 
−
When selecting Station Type = DualDisplay, the Navigation keys below the display are automatically configured. You can view the navigation key programming by selecting Users & Stations -> DAK -> Navig. Keys tab
 
−
*Check that key 1-4 are:
 
−
**I60  ''(Info menu)''
 
−
**I9543  ''(Page UP)''
 
−
**I9544  ''(Page DOWN)''
 
−
**I9542  ''(Menu)''
 
−
[[File:1-2a solution4.PNG|thumb|left|300px|Navigation keys]]
 
−
<br style="clear:both;" />
 
−
[[File:1-2a solution3.PNG|thumb|left|300px|AlphaPro: Users & Stations -> DAK -> Navig keys]]
 
−
<br style="clear:both;" />
 
  
 
<br><br><br><br>
 
<br><br><br><br>

Revision as of 16:01, 22 March 2011

System configuration



Configure the IP Stations

IP Flush Master station

  • Connect the IP Flush Master station to the PoE switch
  • Select Setup to enter the off-line menu. Password: 1851
  • Step to the menu selection IP Settings and enter the following parameters (IPgw is not relevant here):
Off-line menu: IP settings


  • When prompted, Save the changes. When asked for "Restart now" you can select "No".
  • Step to the menu selection AlphaCom IP and enter the following parameters:
Off-line menu: AlphaCom settings


  • When prompted, Save the changes.
  • Step to the menu selection Restart and activate a restart of the station


IP Desktop station

  • Connect the IP Desktop station to the PoE switch
  • Select Setup to enter the off-line menu. Password: 1851
  • Step to the menu selection IP Settings and enter the following parameters (IPgw is not relevant here):
Off-line menu: IP settings


  • When prompted, Save the changes. When asked for "Restart now" you can select "No".
  • Step to the menu selection AlphaCom IP and enter the following parameters:
Off-line menu: AlphaCom settings


  • When prompted, Save the changes.
  • Step to the menu selection Restart and activate a restart of the station

Configure the AlphaCom XE

  • In AlphaPro go to Users & Stations, and select physical number 37; 137 Station 37
  • Use the section on the right and change the configuration as follows:
Off-line menu: IP settings


  • In AlphaPro go to Users & Stations, and select physical number 38; 138 Station 38
  • Use the section on the right and change the configuration as follows:
Off-line menu: IP settings


  • Send the changes to the AlphaCom






Related articles

Retrieved from "https://wiki.zenitel.com/w/index.php?title=1-3a._IP_Stations_–_Master_Stations_(solution)&oldid=107119"