Difference between revisions of "1-3d. IP Stations – SIP Station X-Lite (solution)"
From Zenitel Wiki
(→Install and configure the X-Lite SIP client) |
(→Install and configure the X-Lite SIP client) |
||
| Line 7: | Line 7: | ||
* Download from internet http://www.counterpath.com/x-lite.html, and install it on the PC | * Download from internet http://www.counterpath.com/x-lite.html, and install it on the PC | ||
* During installation you are asked to create a SIP account. Fill in these parameters: | * During installation you are asked to create a SIP account. Fill in these parameters: | ||
| − | [[File:1-3d | + | [[File:1-3d solution2.PNG|thumb|left|250px|SoftClient: File -> Preferences window]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
* Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0 | * Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0 | ||
Revision as of 18:00, 22 March 2011
Install and configure the X-Lite SIP client
- Download from internet http://www.counterpath.com/x-lite.html, and install it on the PC
- During installation you are asked to create a SIP account. Fill in these parameters:
File:1-3d solution2.PNG
SoftClient: File -> Preferences window
- Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0
- Start the SoftClient, and select File -> Preferences, and set these parameters:
- Save Settings
- Select Configure Audio Device to adjust speaker and microphone levels
Configure the AlphaCom XE
- In AlphaPro go to Users & Stations, and select physical number 41; 141 Station 41
- Use the section on the right and change the configuration as follows:
- Send the changes to the AlphaCom XE
Troubleshooting
- If the X-Lite does not register, check the following:
- In AlphaWeb, System Configuration -> Filters, verify that ports for SIP and VoIP Audio are enabled
- In AlphaWeb, System Configuration -> Licenses, verify that there are licenses installed for SIP Stations