Difference between revisions of "1-3d. IP Stations – SIP Station X-Lite (solution)"
From Zenitel Wiki
(→Install and configure the X-Lite SIP client) |
(→Install and configure the X-Lite SIP client) |
||
Line 10: | Line 10: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
* Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0 | * Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0 | ||
− | * Start the | + | * Start the X-Lite |
− | |||
− | |||
===Configure the AlphaCom XE=== | ===Configure the AlphaCom XE=== |
Revision as of 18:03, 22 March 2011
Install and configure the X-Lite SIP client
- Download from internet http://www.counterpath.com/x-lite.html, and install it on the PC
- During installation you are asked to create a SIP account. Fill in these parameters:
- Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0
- Start the X-Lite
Configure the AlphaCom XE
- In AlphaPro go to Users & Stations, and select physical number 41; 141 Station 41
- Use the section on the right and change the configuration as follows:
- Send the changes to the AlphaCom XE
Troubleshooting
- If the X-Lite does not register, check the following:
- In AlphaWeb, System Configuration -> Filters, verify that ports for SIP and VoIP Audio are enabled
- In AlphaWeb, System Configuration -> Licenses, verify that there are licenses installed for SIP Stations