Difference between revisions of "1-4i. RCI - Remote Control Input (solution)"
From Zenitel Wiki
(→Solution) |
|||
Line 2: | Line 2: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
=== Solution === | === Solution === | ||
− | Alarm Message Distribution (AMG): | + | ''Alarm Message Distribution (AMG): |
* The fire alarm system provides a relay contact that closes when the fire alarm is activated. This contact should be connected to RCI 1 and start a prerecorded Fire Alarm Message to all stations. | * The fire alarm system provides a relay contact that closes when the fire alarm is activated. This contact should be connected to RCI 1 and start a prerecorded Fire Alarm Message to all stations. | ||
− | * The Fire Alarm Message should stop when the relay contact opens. | + | * The Fire Alarm Message should stop when the relay contact opens.'' [[File:1-4i solution1.PNG|left|thumb|500px|In AlphaPro, Exchange & System -> RCI, select Input 1, and program the ON and OFF action]] |
− | [[File:1-4i solution1.PNG|left|thumb|500px|In AlphaPro, Exchange & System -> RCI, select Input 1, and program the ON and OFF action]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 23:09, 7 April 2011
Solution
Alarm Message Distribution (AMG):
- The fire alarm system provides a relay contact that closes when the fire alarm is activated. This contact should be connected to RCI 1 and start a prerecorded Fire Alarm Message to all stations.
- The Fire Alarm Message should stop when the relay contact opens.