Difference between revisions of "TCIx Connections"
From Zenitel Wiki
(Created page with "right This article describers all Turbine Compact IP Standard Station connections. The Turbine Compact IP station has a RJ-45 PoE/LAN port, and 6...") |
|||
Line 21: | Line 21: | ||
* To make the station speak its IP address, press the call button on the station. | * To make the station speak its IP address, press the call button on the station. | ||
[[File:TCIS Connections 2.PNG]] | [[File:TCIS Connections 2.PNG]] | ||
+ | |||
+ | <br style="clear:both;" /> | ||
+ | |||
+ | =PCB - Front= | ||
+ | [[File:TCIS Connections 3.PNG]] | ||
+ | |||
+ | <br style="clear:both;" /> | ||
+ | |||
+ | [[File:TCIS Connections 4.PNG|thumb|700px]] | ||
+ | '''P1''' RJ45 PoE port for 10/100 Mbit Ethernet connection. | ||
+ | :The station can be powered from this port if the line supports Power over Ethernet (PoE). | ||
+ | |||
+ | <br style="clear:both;" /> | ||
+ | |||
+ | [[File:TCIS Connections 5.PNG|thumb|700px]] | ||
+ | '''P2'''6-pin plug-on terminal for external connections. | ||
+ | :Pin 1/2 24 VDC for external secondary power if PoE is not used. Pin 1 is positive. | ||
+ | :Pin 3 COM relay | ||
+ | :Pin 4 NO relay | ||
+ | :Pin 5 NC relay | ||
+ | |||
+ | <br style="clear:both;" /> | ||
+ | |||
+ | [[File:TCIS Connections 6.PNG|thumb|700px]] | ||
+ | '''P3''' 10-pin plug-on terminal for external connections. | ||
+ | :Pin 1 5.3V | ||
+ | :Pin 2 GND | ||
+ | :Pin 3 Button Input or LED Driver | ||
+ | :Pin 4 Button Input or LED Driver | ||
+ | :Pin 5 Button Input or LED Driver | ||
+ | :Pin 6 Button Input or LED Driver | ||
+ | :Pin 7 Button Input or LED Driver | ||
+ | :Pin 8 Button Input or LED Driver | ||
+ | :Pin 9 600 ohm balanced line out + | ||
+ | :Pin 10 600 ohm balanced line out -1 | ||
+ | |||
+ | <br style="clear:both;" /> | ||
+ | |||
+ | [[File:TCIS Connections 7.PNG|thumb|700px]] | ||
+ | '''P4''' Loudspeaker & Electret microphone | ||
+ | :Pin 1 10W Speaker amplifier + | ||
+ | :Pin 2 10W Speaker amplifier - | ||
+ | :Pin 3 Electret Microphone + | ||
+ | :Pin 4 Electret Microphone - | ||
+ | |||
+ | =PCB - Rear= | ||
+ | [[File:TCIS Connections 8.PNG]] | ||
+ | |||
+ | [[File:TCIS Connections 9.PNG|thumb|700px]] | ||
+ | '''J6''' 10-pin terminal for digital MEMS Microphone | ||
+ | :Pin 1 Left mic select (Vdd) | ||
+ | :Pin 2 Right mic select (GND) | ||
+ | :Pin 3 Data | ||
+ | :Pin 4 Data | ||
+ | :Pin 5 Vdd 3.3V | ||
+ | :Pin 6 Vdd 3.3V | ||
+ | :Pin 7 CLK | ||
+ | :Pin 8 CLK | ||
+ | :Pin 9 GND | ||
+ | :Pin 10 GND | ||
+ | |||
+ | <br style="clear:both;" /> | ||
+ | |||
+ | =Front Board - Front= | ||
+ | [[File:TCIS Connections 10.PNG]] | ||
+ | |||
+ | <br style="clear:both;" /> | ||
+ | |||
+ | =Front Board - Rear= | ||
+ | [[File:TCIS Connections 11.PNG]] | ||
+ | |||
+ | <br style="clear:both;" /> | ||
[[Category: Turbine]] | [[Category: Turbine]] |
Revision as of 16:19, 9 October 2012
This article describers all Turbine Compact IP Standard Station connections.
The Turbine Compact IP station has a RJ-45 PoE/LAN port, and 6-pin & 10-pin external connectors.
Ethernet/Power | 10/100 Mbps Ethernet RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line. |
Secondary Power | 24 VDC (16 – 48 V) secondary power is provided from an external adapter. |
Relays | There is one Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided. Max: 250VAC/220VDC, 2A, 60W. |
Input/Output | 6 I/Os are available. Each I/O can be configured as either input, output, or LED driver. |
Audio Line Out | A balanced 600 ohm audio line out with induction loop signal |
Note! Use cables crimped with ferrules for terminal block connectors
- When the Turbine Station is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
- To make the station speak its IP address, press the call button on the station.
PCB - Front
P1 RJ45 PoE port for 10/100 Mbit Ethernet connection.
- The station can be powered from this port if the line supports Power over Ethernet (PoE).
P26-pin plug-on terminal for external connections.
- Pin 1/2 24 VDC for external secondary power if PoE is not used. Pin 1 is positive.
- Pin 3 COM relay
- Pin 4 NO relay
- Pin 5 NC relay
P3 10-pin plug-on terminal for external connections.
- Pin 1 5.3V
- Pin 2 GND
- Pin 3 Button Input or LED Driver
- Pin 4 Button Input or LED Driver
- Pin 5 Button Input or LED Driver
- Pin 6 Button Input or LED Driver
- Pin 7 Button Input or LED Driver
- Pin 8 Button Input or LED Driver
- Pin 9 600 ohm balanced line out +
- Pin 10 600 ohm balanced line out -1
P4 Loudspeaker & Electret microphone
- Pin 1 10W Speaker amplifier +
- Pin 2 10W Speaker amplifier -
- Pin 3 Electret Microphone +
- Pin 4 Electret Microphone -
PCB - Rear
J6 10-pin terminal for digital MEMS Microphone
- Pin 1 Left mic select (Vdd)
- Pin 2 Right mic select (GND)
- Pin 3 Data
- Pin 4 Data
- Pin 5 Vdd 3.3V
- Pin 6 Vdd 3.3V
- Pin 7 CLK
- Pin 8 CLK
- Pin 9 GND
- Pin 10 GND
Front Board - Front
Front Board - Rear