Actions

Difference between revisions of "TCIx Connections"

From Zenitel Wiki

(Front Board - Front)
(Front Board - Rear)
Line 20: Line 20:
 
* When the Turbine Station is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
 
* When the Turbine Station is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
 
* To make the station speak its IP address, press the call button on the station.
 
* To make the station speak its IP address, press the call button on the station.
 
 
==Front Board - Rear==
 
[[File:TCIS Connections 11.PNG|500px]]
 
 
<br style="clear:both;" />
 
 
[[Category: Turbine]]
 

Revision as of 08:50, 12 October 2016

TCIS Connections 1.PNG

This article describes all Turbine Compact IP Standard Station connections.

The Turbine Compact IP station has a RJ-45 PoE/LAN port, and 6-pin & 10-pin external connectors.

Ethernet/Power 10/100 Mbps Ethernet RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line.
Secondary Power 24 VDC (16 – 48 V) secondary power is provided from an external adapter.
Relays There is one Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided.
Input/Output 6 I/Os are available. Each I/O can be configured as either input, output, or LED driver.
Audio Line Out A balanced 600 ohm audio line out with induction loop signal
Note! Use cables crimped with ferrules for terminal block connectors
  • When the Turbine Station is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
  • To make the station speak its IP address, press the call button on the station.