Difference between revisions of "2-2b. CCTV with relay - Event Handler (practice)"
From Zenitel Wiki
(→Exercise) |
|||
Line 4: | Line 4: | ||
'''CCTV Control''': | '''CCTV Control''': | ||
− | * Pressing the call button at the Entrance or | + | * Pressing the call button at the Entrance or in the Elevator should generate a call in private ringing mode to the Main Guard. |
* A relay output to the CCTV system should be activated when the private ringing starts. There is one relay for each substation. | * A relay output to the CCTV system should be activated when the private ringing starts. There is one relay for each substation. | ||
* The relay should stay activate until the call is accepted and the conversation is cancelled. (If the call is not answered, the relay must drop when the ringing times out). | * The relay should stay activate until the call is accepted and the conversation is cancelled. (If the call is not answered, the relay must drop when the ringing times out). |
Revision as of 14:40, 27 February 2013
Exercise
CCTV Control:
- Pressing the call button at the Entrance or in the Elevator should generate a call in private ringing mode to the Main Guard.
- A relay output to the CCTV system should be activated when the private ringing starts. There is one relay for each substation.
- The relay should stay activate until the call is accepted and the conversation is cancelled. (If the call is not answered, the relay must drop when the ringing times out).