Difference between revisions of "2-2b. CCTV with relay - Event Handler (solution)"
From Zenitel Wiki
(→Solution) |
|||
Line 5: | Line 5: | ||
'''CCTV Control''': | '''CCTV Control''': | ||
* ''Pressing the call button at the Entrance or in the Elevator should generate a call in private ringing mode to the Main Guard.'' | * ''Pressing the call button at the Entrance or in the Elevator should generate a call in private ringing mode to the Main Guard.'' | ||
− | * ''A relay output to the CCTV system should be activated when the private ringing starts. There is one relay for each substation.'' | + | * ''A relay output to the CCTV system should be activated when the private ringing starts. There is one relay for each substation, RCO 5 and RCO 6.'' |
* ''The relay should stay activate until the call is accepted and the conversation is cancelled. (If the call is not answered, the relay must drop when the ringing times out).'' | * ''The relay should stay activate until the call is accepted and the conversation is cancelled. (If the call is not answered, the relay must drop when the ringing times out).'' | ||
Revision as of 14:43, 27 February 2013
Solution
CCTV Control:
- Pressing the call button at the Entrance or in the Elevator should generate a call in private ringing mode to the Main Guard.
- A relay output to the CCTV system should be activated when the private ringing starts. There is one relay for each substation, RCO 5 and RCO 6.
- The relay should stay activate until the call is accepted and the conversation is cancelled. (If the call is not answered, the relay must drop when the ringing times out).