Difference between revisions of "1-4j. RCO, Call indication (solution)"
From Zenitel Wiki
(→Solution) |
(→Solution) |
||
| Line 5: | Line 5: | ||
*''When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard must be set in “Private” mode by pressing the C-key for more than 2 sec.).'' | *''When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard must be set in “Private” mode by pressing the C-key for more than 2 sec.).'' | ||
| − | '' | + | *''The lamp should be turned off when the private ringing stops.'' |
| − | '' | + | *'' Use logical RCO 10 to operate the relay'' |
Revision as of 15:54, 29 June 2016
Solution
Private Ringing indication
- When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard must be set in “Private” mode by pressing the C-key for more than 2 sec.).
- The lamp should be turned off when the private ringing stops.
- Use logical RCO 10 to operate the relay
Call Queue indication
*When the Main Guard receives a Call Request, the same lamp should be activated to indicate that there is one or more calls in the call queue (Tip: Use event "Priority Mail Present").
- The lamp should be turned off when there are no more calls in the queue.