Actions

Difference between revisions of "ELSIR-10C"

From Zenitel Wiki

(Software Upgrade)
Line 1: Line 1:
[[File:IP Ceiling Turbine.PNG|thumb|350px]]
+
{{APS}}[[File:IP Ceiling Turbine.PNG|thumb|350px|ELSIR-10C]]
 +
== Getting started ==
 +
* [[TKIS Connections|Connections]]
 +
* [[Starting Up Turbine Station|Starting up]]
  
===<u>Highlights</u>===
+
== Configuration ==
* Steel fire dome
+
The loudspeaker can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure.
* 10W Class D, built-in amplifier
+
* [[Turbine Configuration - AlphaCom mode|AlphaCom mode]]
* >100 dB SPL
+
* [[Turbine Configuration - SIP mode|SIP mode]]
* Ideal for Micro Zone PA and systems that require a limited number of speakers
+
* [[Pulse Configuration|Pulse mode]]
* Ideal for speakers installed in remote locations, e.g. roads and railways
 
* Relay output for remote control, e.g. doors, signal lamps, gates
 
* Powered from the IP network cable using Power over Ethernet (PoE)
 
* Ideal for Building Security, Infrastructure and Industrial projects
 
  
===<u>[[TKIS Connections|InterCom connections]]</u>===
+
== Advanced Network Settings ==
 
+
*[[IEEE 802.1X|Network Access Control 802.1X]]
===<u>Configuration</u>===
 
* [[Turbine Configuration]]
 
* [[Active Noise Cancelling|Noise Reduction]]
 
 
 
===<u>Advanced Network Settings</u>===
 
* [[SNMP in Turbine|SNMP]]
 
* [[IEEE 802.1X|802.1X]]
 
 
* [[Turbine Firewall|Firewall]]
 
* [[Turbine Firewall|Firewall]]
  
===<u>Software Upgrade</u>===
+
== Software Upgrade ==
 
* [[Turbine Software Upgrade|Upgrade via the station web interface]]
 
* [[Turbine Software Upgrade|Upgrade via the station web interface]]
 
* [[IMT - Software Upgrade|Upgrade using the IMT tool]]
 
* [[IMT - Software Upgrade|Upgrade using the IMT tool]]
 +
* [[TKIS Restore Factory Defaults|Restore Factory Defaults]]
  
===<u>[[TKIS Indication LEDs|Station Indication LEDs]]</u>===
+
== Connectors, Indicators and Dimensions ==
 
+
* [[Turbine Compact Board Connectors|Board Connections]]
===<u>[[TKIS Restore Factory Defaults|Restore Factory Defaults]]</u>===
+
* [[TKIS Indication LEDs|Station Indication LEDs]]
 
+
* [[Speaker Dimensions & Mounting Instructions|Dimensions]]
===<u>[[Turbine Compact Board Connectors|Board Connections]]</u>===
 
 
 
===<u>[[Speaker Dimensions & Mounting Instructions]]</u>===
 
  
===<u>[http://www.zenitel.com/product/tkis-2 Additional Documentation on Zenitel.com]</u>===
+
== Related Information ==
 +
* [http://www.zenitel.com/product/ELSIR-10C Additional Documentation on Zenitel.com]
  
 
[[Category: Turbine]]
 
[[Category: Turbine]]

Revision as of 11:39, 3 February 2017

APS.png
ELSIR-10C

Getting started

Configuration

The loudspeaker can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure.

Advanced Network Settings

Software Upgrade

Connectors, Indicators and Dimensions

Related Information