Actions

Difference between revisions of "IP Desktop Station LED Indications"

From Zenitel Wiki

(Created page with "====Station LED==== LED4 - Red 5mm LED on board rear side, also seen through front plate. left|thumb|200px|Station LED <br style="clear:bo...")
 
Line 25: Line 25:
 
:*Station connected and registered to the AlphaCom XE Audio Server
 
:*Station connected and registered to the AlphaCom XE Audio Server
 
:*Station not powered up (if no other LEDs are active)
 
:*Station not powered up (if no other LEDs are active)
 +
 +
[[Category:INCA Indication LEDs]]

Revision as of 13:44, 21 October 2016

Station LED

LED4 - Red 5mm LED on board rear side, also seen through front plate.

Station LED


Blinking at 1 second intervals:

  • Station has no connection to the AlphaCom XE Audio Server.

Possible reasons:

  • No connection to Ethernet
  • Wrong AlphaCom IP address configured
  • Invalid IP address
  • No gateway or wrong gateway to the AlphaCom XE Audio Server

Blinking at 5 second intervals:

  • Station connected but NOT registered in the AlphaCom XE Audio Server.

Reason:

  • Station has not been programmed in AlphaPro
  • Missing IP Station license in AlphaCom XE Audio Server

No blinking:

Possible reasons:

  • Station connected and registered to the AlphaCom XE Audio Server
  • Station not powered up (if no other LEDs are active)