Difference between revisions of "Call and Relay operation by URL"
From Zenitel Wiki
(Created page with "{{PS}} It is possible to operate the relay on a station by an URL. In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station. Deactivate the relay: http:...") |
|||
| Line 4: | Line 4: | ||
In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station. | In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station. | ||
| − | Deactivate the relay: | + | *Activate the relay: |
| + | http://10.5.2.138/goform/zForm_webcall?activate=Activate | ||
| + | |||
| + | *Deactivate the relay: | ||
http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate | http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate | ||
| − | + | ||
| − | + | *Activate the relay with a timer (here 1 second): | |
| − | Activate the relay with a timer (here 1 second): | ||
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1 | http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1 | ||
| − | Activate the relay with a timer (here 20 seconds): | + | |
| + | *Activate the relay with a timer (here 20 seconds): | ||
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20<br><br> | http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20<br><br> | ||
[[Category:Pulse - Features]] | [[Category:Pulse - Features]] | ||
Revision as of 16:08, 10 January 2017
It is possible to operate the relay on a station by an URL.
In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station.
- Activate the relay:
http://10.5.2.138/goform/zForm_webcall?activate=Activate
- Deactivate the relay:
http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate
- Activate the relay with a timer (here 1 second):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1
- Activate the relay with a timer (here 20 seconds):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20