Difference between revisions of "Call and Relay operation by URL"
From Zenitel Wiki
Line 1: | Line 1: | ||
{{PS}} | {{PS}} | ||
− | It is possible to operate the relay on a station by an URL. | + | It is possible to initiate a call and to operate the relay on a station by an URL. |
In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station. | In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station. | ||
+ | |||
+ | * Call station 10: | ||
+ | http://10.5.2.138/goform/zForm_webcall?message=Place+call&webcall=10 | ||
+ | |||
+ | * Cancel the call: | ||
+ | http://10.5.2.138/goform/zForm_webcall?message=Stop+call | ||
*Activate the relay: | *Activate the relay: |
Revision as of 10:17, 2 February 2017
It is possible to initiate a call and to operate the relay on a station by an URL.
In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station.
- Call station 10:
http://10.5.2.138/goform/zForm_webcall?message=Place+call&webcall=10
- Cancel the call:
http://10.5.2.138/goform/zForm_webcall?message=Stop+call
- Activate the relay:
http://10.5.2.138/goform/zForm_webcall?activate=Activate
- Deactivate the relay:
http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate
- Activate the relay with a timer (here 1 second):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1
- Activate the relay with a timer (here 20 seconds):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20