Actions

Difference between revisions of "Call and Relay operation by URL"

From Zenitel Wiki

Line 5: Line 5:
  
 
* Call station 10:
 
* Call station 10:
  http://10.5.2.138/goform/zForm_webcall?message=Place+call&webcall=10
+
  <nowiki>http://10.5.2.138/goform/zForm_webcall?message=Place+call&webcall=10</nowiki>
  
 
* Cancel the call:
 
* Cancel the call:
  http://10.5.2.138/goform/zForm_webcall?message=Stop+call
+
  <nowiki>http://10.5.2.138/goform/zForm_webcall?message=Stop+call</nowiki>
  
 
*Activate the relay:
 
*Activate the relay:

Revision as of 10:18, 2 February 2017

PS.png

It is possible to initiate a call and to operate the relay on a station by an URL.

In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station.

  • Call station 10:
http://10.5.2.138/goform/zForm_webcall?message=Place+call&webcall=10
  • Cancel the call:
http://10.5.2.138/goform/zForm_webcall?message=Stop+call
  • Activate the relay:
http://10.5.2.138/goform/zForm_webcall?activate=Activate
  • Deactivate the relay:
http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate
  • Activate the relay with a timer (here 1 second):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1
  • Activate the relay with a timer (here 20 seconds):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20