Difference between revisions of "Call and Relay operation by URL"
From Zenitel Wiki
m (Asle moved page Relay operation by URL to Call and Relay operation by URL) |
|||
Line 23: | Line 23: | ||
− | [[Category:Pulse - | + | [[Category: Pulse - Configuration]] |
Revision as of 16:17, 7 March 2019
It is possible to initiate a call and to operate the relay on a station by an URL.
In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station.
- Call station number 10:
http://10.5.2.138/goform/zForm_webcall?message=Place+call&webcall=10
- Cancel the call:
http://10.5.2.138/goform/zForm_webcall?message=Stop+call
- Activate the relay:
http://10.5.2.138/goform/zForm_webcall?activate=Activate
- Deactivate the relay:
http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate
- Activate the relay with a timer (here 1 second):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1
- Activate the relay with a timer (here 20 seconds):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20