Actions

Difference between revisions of "Pulse Server"

From Zenitel Wiki

 
(10 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{P}}
 
{{P}}
One of the intercom stations in a Pulse system must be set as the '''Pulse Server'''. The Pulse Server is acting as a server for the other intercom stations in the system. Any [[Intercom stations|IP Intercom station]] can be a Pulse Server. There must be only one Pulse Server in the installation.  
+
One of the intercom stations in a Pulse system must be set as the '''Pulse Server'''. The Pulse Server is acting as a server for the other intercom stations in the system. Any [[:Category:Stations|IP Intercom station]] can be a Pulse Server. There must be only one Pulse Server in the installation.  
  
Note that you get extended functionality when using a [[Turbine series|Turbine station]] with firmware 4.2 or higher as Pulse Server.
+
The Pulse Server must have a '''static IP address''' (not dynamically assigned via DHCP).
  
The Pulse Server must have a static IP address (not dynamically assigned via DHCP).
+
{{obs|It is recommended not to use TCIV (Turbine station with camera) as Pulse server in a system with more than 5 registered clients. For such systems please use any other Vingtor-Stentofon IP station type, such as TCIS-x, or TKIS-2. }}
  
[[Category: Pulse]]
+
[[Category: Pulse - Configuration]]

Latest revision as of 16:20, 7 March 2019

Pulse icon 300px.png

One of the intercom stations in a Pulse system must be set as the Pulse Server. The Pulse Server is acting as a server for the other intercom stations in the system. Any IP Intercom station can be a Pulse Server. There must be only one Pulse Server in the installation.

The Pulse Server must have a static IP address (not dynamically assigned via DHCP).

OBS icon It is recommended not to use TCIV (Turbine station with camera) as Pulse server in a system with more than 5 registered clients. For such systems please use any other Vingtor-Stentofon IP station type, such as TCIS-x, or TKIS-2.