Actions

Difference between revisions of "Call and Relay operation by URL"

From Zenitel Wiki

(Created page with "{{PS}} It is possible to operate the relay on a station by an URL. In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station. Deactivate the relay: http:...")
 
 
(7 intermediate revisions by one other user not shown)
Line 1: Line 1:
{{PS}}
+
{{S}}
It is possible to operate the relay on a station by an URL.  
+
It is possible to initiate a call and to operate the relay on a station by an URL.  
  
 
In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station.
 
In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station.
  
Deactivate the relay:
+
* Call station number 10:
http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate
+
  <nowiki>http://10.5.2.138/goform/zForm_webcall?message=Place+call&webcall=10</nowiki>
Activate the relay:
 
http://10.5.2.138/goform/zForm_webcall?activate=Activate
 
Activate the relay with a timer (here 1 second):
 
  http://10.5.2.138/goform/zForm_webcall?activate=Activate&amp;relaytimer=1
 
Activate the relay with a timer (here 20 seconds):
 
http://10.5.2.138/goform/zForm_webcall?activate=Activate&amp;relaytimer=20<br><br>  
 
  
 +
* Cancel the call:
 +
<nowiki>http://10.5.2.138/goform/zForm_webcall?message=Stop+call</nowiki>
  
[[Category:Pulse - Features]]
+
*Activate the relay:
 +
<nowiki>http://10.5.2.138/goform/zForm_webcall?activate=Activate</nowiki>
 +
 
 +
*Deactivate the relay:
 +
<nowiki>http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate</nowiki>
 +
 
 +
*Activate the relay with a timer (here 1 second):
 +
<nowiki>http://10.5.2.138/goform/zForm_webcall?activate=Activate&amp;relaytimer=1</nowiki>
 +
 
 +
*Activate the relay with a timer (here 20 seconds):
 +
<nowiki>http://10.5.2.138/goform/zForm_webcall?activate=Activate&amp;relaytimer=20</nowiki>
 +
 
 +
 
 +
[[Category: SIP intercom - Configuration]]

Latest revision as of 09:01, 13 September 2019

SIP Icon 300px.png

It is possible to initiate a call and to operate the relay on a station by an URL.

In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station.

  • Call station number 10:
http://10.5.2.138/goform/zForm_webcall?message=Place+call&webcall=10
  • Cancel the call:
http://10.5.2.138/goform/zForm_webcall?message=Stop+call
  • Activate the relay:
http://10.5.2.138/goform/zForm_webcall?activate=Activate
  • Deactivate the relay:
http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate
  • Activate the relay with a timer (here 1 second):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1
  • Activate the relay with a timer (here 20 seconds):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20