Actions

Difference between revisions of "IP Desktop Station LED Indications"

From Zenitel Wiki

Line 4: Line 4:
 
<br style="clear:both;" />
 
<br style="clear:both;" />
 
'''Blinking at 1 second intervals:'''<br/>
 
'''Blinking at 1 second intervals:'''<br/>
Station has no connection to the AlphaCom XE Audio Server.
+
Station has no connection to the ICX-AlphaCom
  
 
Possible reasons:
 
Possible reasons:
Line 10: Line 10:
 
* Wrong AlphaCom IP address configured  
 
* Wrong AlphaCom IP address configured  
 
* Invalid IP address  
 
* Invalid IP address  
* No gateway or wrong gateway to the AlphaCom XE Audio Server
+
* No gateway or wrong gateway to the ICX-AlphaCom
  
 
'''Blinking at 5 second intervals:'''<br/>
 
'''Blinking at 5 second intervals:'''<br/>
Station connected but NOT registered in the AlphaCom XE Audio Server.
+
Station connected but NOT registered in the ICX-AlphaCom  
  
 
Possible reasons:  
 
Possible reasons:  
 
* Station has not been programmed in AlphaPro
 
* Station has not been programmed in AlphaPro
* Missing IP Station license in AlphaCom XE Audio Server
+
* Missing IP Station license in the ICX-AlphaCom
  
 
'''No blinking:'''
 
'''No blinking:'''
  
 
Possible reasons:  
 
Possible reasons:  
* Station connected and registered to the AlphaCom XE Audio Server
+
* Station connected and registered to the ICX-AlphaCom
 
* Station not powered up (if no other LEDs are active)
 
* Station not powered up (if no other LEDs are active)
  
 
[[Category:Station Indication LEDs]]
 
[[Category:Station Indication LEDs]]

Revision as of 12:51, 17 November 2020

Station LED

LED4 - Red 5mm LED on board rear side, also seen through front plate.

Station LED


Blinking at 1 second intervals:
Station has no connection to the ICX-AlphaCom

Possible reasons:

  • No connection to Ethernet
  • Wrong AlphaCom IP address configured
  • Invalid IP address
  • No gateway or wrong gateway to the ICX-AlphaCom

Blinking at 5 second intervals:
Station connected but NOT registered in the ICX-AlphaCom

Possible reasons:

  • Station has not been programmed in AlphaPro
  • Missing IP Station license in the ICX-AlphaCom

No blinking:

Possible reasons:

  • Station connected and registered to the ICX-AlphaCom
  • Station not powered up (if no other LEDs are active)