Difference between revisions of "AlphaCom supervision of protocol converter daemons"
From Zenitel Wiki
| Line 14: | Line 14: | ||
* If no new idle frame is received from the daemon within 30 second the stop/start procedure is repeated, this sequence will be repeated 5 times. | * If no new idle frame is received from the daemon within 30 second the stop/start procedure is repeated, this sequence will be repeated 5 times. | ||
| + | |||
| + | |||
| + | Example of [[Syslog]] [[AlphaLog]] report for this sequence: | ||
| + | W(204.65) INFO_DP_LINK_DOWN, no:337 "" P1: 31, P2: 150, P3: 0 DP link down, port 31 node 150 device 0 | ||
| + | W(204.65) UNEXP_SIG, no:338 "sipd start" P1: 31, P2: 0, P3: 0 | ||
| + | W(204.65) INFO_DP_IDLE_FRAME, no:339 "" P1: 31, P2: 150, P3: 0 Peer on ACDP port 31 is node 150 device 0 | ||
Revision as of 03:35, 25 May 2007
SIPD and RMD are connected to AMCD through local IP sockets using Stentofon Simple Link Layer
- The daemon send an idle frame to AMCD every 5? second.
- If no idle frame is received from the daemon within 30 second the daemon is terminated by AMCD using either:
/opt/amc/script/rmd stop
or
/opt/amc/script/sipd stop
- 5 seconds later the deamon is restarted by AMCD using:
/opt/amc/script/rmd start
or
/opt/amc/script/sipd start
- If no new idle frame is received from the daemon within 30 second the stop/start procedure is repeated, this sequence will be repeated 5 times.
Example of Syslog AlphaLog report for this sequence:
W(204.65) INFO_DP_LINK_DOWN, no:337 "" P1: 31, P2: 150, P3: 0 DP link down, port 31 node 150 device 0 W(204.65) UNEXP_SIG, no:338 "sipd start" P1: 31, P2: 0, P3: 0 W(204.65) INFO_DP_IDLE_FRAME, no:339 "" P1: 31, P2: 150, P3: 0 Peer on ACDP port 31 is node 150 device 0