Actions

Difference between revisions of "Short Numbers"

From Zenitel Wiki

 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
== Description ==
+
{{AI}}
Short Numbers originally was implemented for easy calling of phone numbers related to the PNCI. Short numbers were later extended to also include [[SIP]] trunks and a system of selective inwards dialing.  
+
It is possible to define [[Short Numbers]] for external telephone calls. A "short Number" can be used for outgoing phone calls or for incoming phone calls:
 +
* '''Outgoing phone calls''': A "Short Number" is typically a 2- or 3-digit number, and when dialed you will be connected to an external phone line, and a preconfigured phone number is dialed.
 +
* '''Incoming phone calls''': An incoming call from a SIP trunk can be routed to the Short Number. When calling the Short Number a new dial tone will be heard. If the user starts dialing, the dialing procedure will be regular. If no dialing within the preset time, the call will be routed to a preconfigured number.
  
To create a Short Number, you need to select a user ''without a physical number'' in ['''Users & Stations'''] in AlphaPro, then select the ['''Phone'''] button.
+
To create a Short Number, select a '''user 553 or higher''', then select the '''Phone''' button.
  
Short Number Mode:<br />
 
*'''PNCI''': Enter the telephone number to be dialled, and select the hunt group in which the PNCI is a member (normally [[Groups#Group_50|group 50]]) <br />
 
*'''SIP''': Enter the telephone number to be dialled, and select the SIP Trunk node. Note: Will work only when the SIP Gatway is configured to use 'one-stage' dialing. See [[Configuration_guide_for_AudioCodes_MP114/118,_v5.4_and_higher#Short_number|configuration example here]]<br />
 
*'''Selective Dialing''': When calling the Short Number a new dial tone will be heard. If the user starts dialing, the dialing procedure will be regular. If no dialing, the dial tone will time out and the directory number stored as telephone number will be activated. This feature is useful when calling in to the AlphaCom via a SIP gateway. The SIP gateway can be configured to call this Short Number which makes it possible to do selective dialing, or be transfered to a preset number if no dialing.<br />
 
  
Examples:
+
<gallery caption="Short Number configuration" widths="650px" heights="520px" perrow="2">
[[Image:Shortnumber for SIP call.jpg|thumb|500px|left|'''SIP''': Dial shortnumber 654 to call telephone number 40002547 via SIP Gateway]]
+
File:AP Phone SIP.png|'''''Outgoing call''': Dial 654 to access the SIP Trunk and call phone number 48203445''
<br style="clear:both;" />
+
File:AP Phone SelDial.png|'''''Incoming call''': When 643 is dialed from SIP trunk, a new dial tone is presented. If no dialing within 4 sec, the call is routed to number 103.''
[[Image:Shortnumber Selective dialing.jpg|thumb|500px|left|'''Selective dialing''': Dial 657 and get a new dial tone. If no digits are pressed within 4 sec., a call is made to number 109]]
+
</gallery>
<br style="clear:both;" />
 
  
 +
* '''Telephone Number''': The number to call when the Short Number is dialed. Maximum 18 digits
 +
 +
* '''Short number mode''': There are thre modes. "PNCI" and "SIP" are used for outgoing telephone calls, while "Selective dialing" is used for incoming telephone calls.
 +
**'''PNCI''': Shortnumber configuration for outgoing calls via the [[PNCI|PNCI telephone interface]]. Enter the telephone number to be dialled, and select the hunt group in which the PNCI is a member (normally [[Groups#Group_50|group 50]])
 +
*** '''Telephone Group''': Here you select the group which is used to include all phone lines reached by dialling prefix 0, (group 50)
 +
**'''SIP''': Shortnumber configuration for outgoing calls via SIP Trunk line.
 +
*** '''Node''': Select the SIP Trunk node that the call should be routed to. Note: Will work only when the SIP Gateway is configured to use 'one-stage' dialing.  [[Configuration_guide_for_AudioCodes_MP114/118,_v5.4_and_higher#One_Stage_dialing|Configuration example here]].
 +
**'''Selective dialing''': Can be used for two-stage incoming calls from SIP trunks. When calling the Short Number a new dial tone will be heard. If the user starts dialing, the dialing procedure will be regular. If no dialing, the dial tone will time out and the directory number stored as "''Telephone number''" will be activated. This feature is useful when calling in to the AlphaCom via a SIP gateway. The SIP gateway can be configured to call this Short Number which makes it possible to do selective dialing, or be transfered to a preset number if no dialing
 +
*** '''Timeout''': If no digits are received within the set time, the call will be routed to the "Telephone number"
 +
<br><br>
 
== Software requirement==
 
== Software requirement==
*AMC 10.40
+
*AlphaCom: Software 10.40 or later
*AlphaPro 10.40
+
*AlphaPro: 10.40 or later
  
  
  
 
Back to [[Feature description]]
 
Back to [[Feature description]]
 +
 +
[[Category: ICX-AlphaCom features]]
 
[[Category: AlphaCom features]]
 
[[Category: AlphaCom features]]

Latest revision as of 15:38, 2 June 2022

AI.png

It is possible to define Short Numbers for external telephone calls. A "short Number" can be used for outgoing phone calls or for incoming phone calls:

  • Outgoing phone calls: A "Short Number" is typically a 2- or 3-digit number, and when dialed you will be connected to an external phone line, and a preconfigured phone number is dialed.
  • Incoming phone calls: An incoming call from a SIP trunk can be routed to the Short Number. When calling the Short Number a new dial tone will be heard. If the user starts dialing, the dialing procedure will be regular. If no dialing within the preset time, the call will be routed to a preconfigured number.

To create a Short Number, select a user 553 or higher, then select the Phone button.


  • Telephone Number: The number to call when the Short Number is dialed. Maximum 18 digits
  • Short number mode: There are thre modes. "PNCI" and "SIP" are used for outgoing telephone calls, while "Selective dialing" is used for incoming telephone calls.
    • PNCI: Shortnumber configuration for outgoing calls via the PNCI telephone interface. Enter the telephone number to be dialled, and select the hunt group in which the PNCI is a member (normally group 50)
      • Telephone Group: Here you select the group which is used to include all phone lines reached by dialling prefix 0, (group 50)
    • SIP: Shortnumber configuration for outgoing calls via SIP Trunk line.
      • Node: Select the SIP Trunk node that the call should be routed to. Note: Will work only when the SIP Gateway is configured to use 'one-stage' dialing. Configuration example here.
    • Selective dialing: Can be used for two-stage incoming calls from SIP trunks. When calling the Short Number a new dial tone will be heard. If the user starts dialing, the dialing procedure will be regular. If no dialing, the dial tone will time out and the directory number stored as "Telephone number" will be activated. This feature is useful when calling in to the AlphaCom via a SIP gateway. The SIP gateway can be configured to call this Short Number which makes it possible to do selective dialing, or be transfered to a preset number if no dialing
      • Timeout: If no digits are received within the set time, the call will be routed to the "Telephone number"



Software requirement

  • AlphaCom: Software 10.40 or later
  • AlphaPro: 10.40 or later


Back to Feature description