Actions

Difference between revisions of "Volume and handset override"

From Zenitel Wiki

(New page: {{stub}} Volume and handset override is activated by the following features: * Group calls with Alarm priority * Remote setup of audio program to group, using [[Remote setup of program to ...)
 
 
(36 intermediate revisions by one other user not shown)
Line 1: Line 1:
{{stub}}
+
{{AI}}
 +
'''Volume and handset override''' is a feature that forces the station volume to maximum level, and in case the handset is off-hook, it will reconnect the loudspeaker by forcing the station to go on-hook. The feature is applicable for analog display stations and all types of IP stations.
 +
 
 
Volume and handset override is activated by the following features:
 
Volume and handset override is activated by the following features:
* Group calls with Alarm priority
+
* '''Group calls''' with [[Groups#Group_Call_Priority|Alarm priority]]
* Remote setup of audio program to group, using [[Remote setup of program to group feature|feature code 75]], event handler command [[PRG]], or ACDP command [[program|$PROG]]
+
* '''Audio Program''', remotly setup to group, activated by:
 +
** Using [[Remote setup of program to group feature|feature code 75]]
 +
**Event handler command [[PRG]], or  
 +
**[[ACDP]] command [[PROGRAM|$PROG]].
 +
:In AlphaPro the audio program must have the flag [[Audio Programs (AlphaPro)|Volume/Handset Override]] enabled.
 +
*  '''Prerecorded voice alarm messages''' (ASVP), remotly setup by:
 +
**The [[Start Alarm message at station feature|feature code 761]]
 +
**The event handler commands [[AMS - Alarm Message to Station|AMS]] and [[AMG]], or
 +
**The [[ACDP]] data command [[ALARM_MSG|$ALRM]]
 +
**The [[ACDP]] data command [[GROUP MSG|$GM]] when parameter 5 = 4.
 +
 
 +
 
 +
{{Note|Analog stations without display data receiver inside do not support handset and volume override.(E.g. models 1007034210, 1007036210, VMP-619 and 1007001210).}}
 +
 
 +
 
 +
See also: [[MVO|$MVO - Mask handset and volume override]]
 +
 
 +
[[Category: ICX-AlphaCom features]]
 +
[[Category: AlphaCom features]]

Latest revision as of 09:54, 5 May 2023

AI.png

Volume and handset override is a feature that forces the station volume to maximum level, and in case the handset is off-hook, it will reconnect the loudspeaker by forcing the station to go on-hook. The feature is applicable for analog display stations and all types of IP stations.

Volume and handset override is activated by the following features:

In AlphaPro the audio program must have the flag Volume/Handset Override enabled.
  • Prerecorded voice alarm messages (ASVP), remotly setup by:


Note icon Analog stations without display data receiver inside do not support handset and volume override.(E.g. models 1007034210, 1007036210, VMP-619 and 1007001210).



See also: $MVO - Mask handset and volume override