Actions

Difference between revisions of "Volume and handset override"

From Zenitel Wiki

 
(14 intermediate revisions by one other user not shown)
Line 1: Line 1:
'''Volume and handset override''' is a feature that forces the station volume to maximum level, and in case the handset is off-hook, it will reconnect the loudspeaker by forcing the station to go on-hook. The feature is applicable for analog display stations and all types of IP stations. Analog stations without display do not support handset and volume override.
+
{{AI}}
 
+
'''Volume and handset override''' is a feature that forces the station volume to maximum level, and in case the handset is off-hook, it will reconnect the loudspeaker by forcing the station to go on-hook. The feature is applicable for analog display stations and all types of IP stations.  
  
 
Volume and handset override is activated by the following features:
 
Volume and handset override is activated by the following features:
Line 11: Line 11:
 
*  '''Prerecorded voice alarm messages''' (ASVP), remotly setup by:
 
*  '''Prerecorded voice alarm messages''' (ASVP), remotly setup by:
 
**The [[Start Alarm message at station feature|feature code 761]]
 
**The [[Start Alarm message at station feature|feature code 761]]
**The event handler command [[AMG]], or  
+
**The event handler commands [[AMS - Alarm Message to Station|AMS]] and [[AMG]], or  
 
**The [[ACDP]] data command [[ALARM_MSG|$ALRM]]
 
**The [[ACDP]] data command [[ALARM_MSG|$ALRM]]
 +
**The [[ACDP]] data command [[GROUP MSG|$GM]] when parameter 5 = 4.
 +
 +
 +
{{Note|Analog stations without display data receiver inside do not support handset and volume override.(E.g. models 1007034210, 1007036210, VMP-619 and 1007001210).}}
 +
  
 +
See also: [[MVO|$MVO - Mask handset and volume override]]
  
 +
[[Category: ICX-AlphaCom features]]
 
[[Category: AlphaCom features]]
 
[[Category: AlphaCom features]]

Latest revision as of 09:54, 5 May 2023

AI.png

Volume and handset override is a feature that forces the station volume to maximum level, and in case the handset is off-hook, it will reconnect the loudspeaker by forcing the station to go on-hook. The feature is applicable for analog display stations and all types of IP stations.

Volume and handset override is activated by the following features:

In AlphaPro the audio program must have the flag Volume/Handset Override enabled.
  • Prerecorded voice alarm messages (ASVP), remotly setup by:


Note icon Analog stations without display data receiver inside do not support handset and volume override.(E.g. models 1007034210, 1007036210, VMP-619 and 1007001210).



See also: $MVO - Mask handset and volume override