Actions

Difference between revisions of "Volume and handset override"

From Zenitel Wiki

 
(9 intermediate revisions by one other user not shown)
Line 1: Line 1:
 +
{{AI}}
 
'''Volume and handset override''' is a feature that forces the station volume to maximum level, and in case the handset is off-hook, it will reconnect the loudspeaker by forcing the station to go on-hook. The feature is applicable for analog display stations and all types of IP stations.  
 
'''Volume and handset override''' is a feature that forces the station volume to maximum level, and in case the handset is off-hook, it will reconnect the loudspeaker by forcing the station to go on-hook. The feature is applicable for analog display stations and all types of IP stations.  
 
Note that analog stations without display data receiver inside do not support handset and volume override.(E.g. models 1007034210, 1007036210, VMP-619 and 1007001210).
 
  
 
Volume and handset override is activated by the following features:
 
Volume and handset override is activated by the following features:
Line 12: Line 11:
 
*  '''Prerecorded voice alarm messages''' (ASVP), remotly setup by:
 
*  '''Prerecorded voice alarm messages''' (ASVP), remotly setup by:
 
**The [[Start Alarm message at station feature|feature code 761]]
 
**The [[Start Alarm message at station feature|feature code 761]]
**The event handler commands [[AMS]] and [[AMG]], or  
+
**The event handler commands [[AMS - Alarm Message to Station|AMS]] and [[AMG]], or  
 
**The [[ACDP]] data command [[ALARM_MSG|$ALRM]]
 
**The [[ACDP]] data command [[ALARM_MSG|$ALRM]]
 +
**The [[ACDP]] data command [[GROUP MSG|$GM]] when parameter 5 = 4.
 +
 +
 +
{{Note|Analog stations without display data receiver inside do not support handset and volume override.(E.g. models 1007034210, 1007036210, VMP-619 and 1007001210).}}
  
  
 
See also: [[MVO|$MVO - Mask handset and volume override]]
 
See also: [[MVO|$MVO - Mask handset and volume override]]
 +
 +
[[Category: ICX-AlphaCom features]]
 
[[Category: AlphaCom features]]
 
[[Category: AlphaCom features]]

Latest revision as of 09:54, 5 May 2023

AI.png

Volume and handset override is a feature that forces the station volume to maximum level, and in case the handset is off-hook, it will reconnect the loudspeaker by forcing the station to go on-hook. The feature is applicable for analog display stations and all types of IP stations.

Volume and handset override is activated by the following features:

In AlphaPro the audio program must have the flag Volume/Handset Override enabled.
  • Prerecorded voice alarm messages (ASVP), remotly setup by:


Note icon Analog stations without display data receiver inside do not support handset and volume override.(E.g. models 1007034210, 1007036210, VMP-619 and 1007001210).



See also: $MVO - Mask handset and volume override