Actions

Difference between revisions of "AlphaPro 12 - Error messages"

From Zenitel Wiki

 
(12 intermediate revisions by one other user not shown)
Line 1: Line 1:
If AlphaPro is not able to communicate with the AlphaCom server, there are several possible reasons:
+
{{AI}}
 +
If AlphaPro version 12 is not able to communicate with the AlphaCom server, there are several possible reasons:
  
 
AlphaPro 12 error messages:
 
AlphaPro 12 error messages:
* ''The remote server returned an error: (401) Unauthorized'': Wrong username/password for logging in
+
* ''The remote server returned an error: (401) Unauthorized'': Wrong [[Communicate (alphaPro)|username/password]] for logging in
* ''Unable to connect to the remote server'': Incorrect IP address in AlphaPro (Exchange & System > System) - The IP address doesn't match the IP address of the AlphaCom
+
* ''The remote server returned an error: (404) Not Found'': AlphaPro v.12 is used towards AlphaCom v. 11. See [[AlphaPro - Compatibility|compatibility chart]].
* ''The remote server returned an error: (404) Not Found'': AlphaPro v.12 is used towards AlphaCom v. 11.
+
* ''The remote server returned an error: [[(500) Internal Server Error|(500) Internal Server Error'']]: The AlphaCom has "Standby Stations" licenses installed (which is the case when the AlphaCom is used as a Secondary server in a [[Redundant Servers (AlphaCom XE)|redundant system]] with two AlphaCom servers)
* ''The remote server returned an error: (500) Internal Server Error'': The AlphaCom has "Standby Stations" licenses installed (which is the case when the the AlphaCom is used as a standby server in a redundant system with two AlphaCom servers)
+
* ''Unable to connect to x.x.x.x'' (x.x.x.x being the IP address): TCP port 60001 ("AlphaPro") is disabled in [[AlphaWeb#Filters|Filters setting]] in Web interface (Applies to SendAll/SendChg operations only)
* ''Unable to connect to x.x.x.x'' (x.x.x.x is the IP address): TCP port 60001 ("AlphaPro") is disabled in Filters setting in Web interface (Applies to SendAll/SendChg operations only)
+
* ''Unable to connect to the remote server'': Incorrect IP address in AlphaPro ([[Exchange_%26_System_(AlphaPro)#System|Exchange & System > System]]) - The IP address doesn't match the IP address of the AlphaCom
* ''Unable to connect to the remote server'': TCP port 80 (HTTP) is disabled in Filters setting in Web interface
+
* ''Unable to connect to the remote server'': TCP port 80 (HTTP) is disabled in [[AlphaWeb#Filters|Filters setting]] in Web interface
 +
 
 +
 
 +
[[Category:AlphaPro Troubleshooting]]

Latest revision as of 09:53, 24 October 2023

AI.png

If AlphaPro version 12 is not able to communicate with the AlphaCom server, there are several possible reasons:

AlphaPro 12 error messages:

  • The remote server returned an error: (401) Unauthorized: Wrong username/password for logging in
  • The remote server returned an error: (404) Not Found: AlphaPro v.12 is used towards AlphaCom v. 11. See compatibility chart.
  • The remote server returned an error: (500) Internal Server Error: The AlphaCom has "Standby Stations" licenses installed (which is the case when the AlphaCom is used as a Secondary server in a redundant system with two AlphaCom servers)
  • Unable to connect to x.x.x.x (x.x.x.x being the IP address): TCP port 60001 ("AlphaPro") is disabled in Filters setting in Web interface (Applies to SendAll/SendChg operations only)
  • Unable to connect to the remote server: Incorrect IP address in AlphaPro (Exchange & System > System) - The IP address doesn't match the IP address of the AlphaCom
  • Unable to connect to the remote server: TCP port 80 (HTTP) is disabled in Filters setting in Web interface