Actions

Difference between revisions of "TCP ports used by AlphaPro"

From Zenitel Wiki

(ICX-AlphaCom server)
Line 9: Line 9:
 
When using AlphaPro to configure an [[:category:ICX-AlphaCom Platform|ICX-AlphaCom system]], make sure that '''Node Type''' is set to "ICX" in [[Exchange_%26_System_(AlphaPro)#General|Exchange & System > System]]:
 
When using AlphaPro to configure an [[:category:ICX-AlphaCom Platform|ICX-AlphaCom system]], make sure that '''Node Type''' is set to "ICX" in [[Exchange_%26_System_(AlphaPro)#General|Exchange & System > System]]:
  
[[Image:AlphaPro Type ICX.PNG|left|600px]]
+
[[Image:AlphaPro_TCP_ICX2.PNG|left|600px]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  

Revision as of 09:35, 9 November 2023

AI.png

Depending on server type (AlphaCom XE or ICX-AlphaCom) and the AlphaPro version, AlphaPro is using different TCP ports when communicating with the server.

If you get an error message in AlphaPro when trying to communicate with the server, check that:

  • Node Type is correct in AlphaPro
  • That the relevant TCP ports are enabled in the Filters Settings in the web interface of the server.

ICX-AlphaCom server

When using AlphaPro to configure an ICX-AlphaCom system, make sure that Node Type is set to "ICX" in Exchange & System > System:

AlphaPro TCP ICX2.PNG



TCP Ports used (must be enabled in Filters in web interface):

AlphaPro TCP ICX.PNG



AlphaCom server

When using AlphaPro to configure an AlphaCom XE system, make sure that Node Type is set to "AlphaCom XE" in Exchange & System > System:

AlphaPro Type XE.PNG



TCP Ports used (must be enabled in Filters in web interface):

AlphaPro TCP XE.PNG



Related articles

Reset and Set Node buttons fail