Actions

Difference between revisions of "I/O Settings (Edge)"

From Zenitel Wiki

(Created page with "{{E}} The Turbine range of stations have configurable I/O's, i.e. you can choose if an I/O should be used as an Input or as an Output....")
 
 
(9 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
{{E}}
 
{{E}}
 
The [[:Category:Stations#Turbine_stations|Turbine range of stations]] have configurable I/O's, i.e. you can choose if an I/O should be used as an Input or as an Output. By default all I/O's are set as Inputs.  
 
The [[:Category:Stations#Turbine_stations|Turbine range of stations]] have configurable I/O's, i.e. you can choose if an I/O should be used as an Input or as an Output. By default all I/O's are set as Inputs.  
* When configured to be an '''Input''', the input actions are configured from [[Direct Access Key & Ringlist Settings (Edge/SIP)|Direct Access Key Settings]] (an input behaves like a push button).
+
* When configured to be an '''Input''', the input actions are configured from [[Direct Access Key & Ringlist Settings (Edge)|Direct Access Key Settings]].
* When configured to be an '''Output''', the output operation is configured from the [[Relay Settings (Edge)|Edge Controller in an Edge system]], but locally in the station when used in SIP mode.
+
* When configured to be an '''Output''', the output operation is configured from the [[Relay Settings (Edge)|Edge Controller in an Edge system]].
  
Select '''SIP Configuration > I/O''' from the menu
+
By default an input is triggered by a closing contact (referred to as "NO - Normally Open"). The input can be configured as "Input NC" (NC - Normally Closed) instead. (Requires firmware 8.1.3.0 or later).
[[File:IOsettings.png|thumb|left|500px]]
+
 
 +
Enable [[Advanced Configuration Mode (Edge)|Advanced Configuration]] mode, and select '''Edge Configuration > I/O''' from the menu
 +
[[File:Edge IOs.PNG|thumb|left|700px|I/O settings web page]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
* Select either '''Input''' or '''Output''' options from the drop-down box for '''I/O Pins''' 1 to 6.
+
For each of the six I/O pins the options are:
 +
* '''Input''' (default)
 +
* '''Input NC'''
 +
* '''Output'''  
 +
 
  
 
===Use Inputs As Key Matrix===
 
===Use Inputs As Key Matrix===
If there is a need for more than the 6 inputs available, it is possible to use the '''Use Inputs As Key Matrix''' and combine inputs as in a diode matrix, and in this way create more DAKs.  
+
If there is a need for more than the 6 inputs available, it is possible to use the '''Use Inputs As Key Matrix''' and combine inputs as in a diode matrix, and in this way create more DAKs. By for example using 3 inputs it is possible to get 7 DAKs.  
By for example using 3 inputs it is possible to get 7 DAKs.  
+
 
 +
This is enabled in [[Advanced_Configuration_Mode_(Edge)|Advanced Configuration Mode]] and IO Settings:
 +
[[File:Edge IOsMatrix.PNG|thumb|left|700px|Enable IO Matrix]]
 +
<br style="clear:both;" />
 +
 
  
 
The different options are:
 
The different options are:
  
 
*2 Inputs (input 1-2, DAK 1-3)
 
*2 Inputs (input 1-2, DAK 1-3)
{| border="1" {{table}}
+
{| border="1"  
 
| align="center" style="background:#ffd400;"|'''Input 2'''
 
| align="center" style="background:#ffd400;"|'''Input 2'''
 
| align="center" style="background:#ffd400;"|'''Input 1'''
 
| align="center" style="background:#ffd400;"|'''Input 1'''
Line 35: Line 45:
 
*3 Inputs (input 1-3, DAK 1-7):
 
*3 Inputs (input 1-3, DAK 1-7):
 
[[File:IO as matrix.png|thumb|right|500px|Diode matrix when using 3 inputs to activate 7 DAK keys]]  
 
[[File:IO as matrix.png|thumb|right|500px|Diode matrix when using 3 inputs to activate 7 DAK keys]]  
{| border="1" {{table}}
+
{| border="1"  
 
| align="center" style="background:#ffd400;"|'''Input 3'''
 
| align="center" style="background:#ffd400;"|'''Input 3'''
 
| align="center" style="background:#ffd400;"|'''Input 2'''
 
| align="center" style="background:#ffd400;"|'''Input 2'''
Line 60: Line 70:
  
 
*4 Inputs (input 1-4, DAK 1-15):
 
*4 Inputs (input 1-4, DAK 1-15):
{| border="1" {{table}}
+
{| border="1"  
 
| align="center" style="background:#ffd400;"|'''Input 4'''
 
| align="center" style="background:#ffd400;"|'''Input 4'''
 
| align="center" style="background:#ffd400;"|'''Input 3'''
 
| align="center" style="background:#ffd400;"|'''Input 3'''
Line 100: Line 110:
 
|}
 
|}
  
The DAK actions are configured from [[Direct Access Key & Ringlist Settings (Edge/SIP)|Direct Access Key Settings]].
+
The DAK actions are configured from [[Direct Access Key & Ringlist Settings (Edge)|Direct Access Key Settings]].
  
The input matrix function require '''Turbine software 4.7''' or later.
 
  
  
 
[[Category: IC-EDGE Configuration]]
 
[[Category: IC-EDGE Configuration]]

Latest revision as of 10:17, 12 January 2024

Edge-icon.jpg

The Turbine range of stations have configurable I/O's, i.e. you can choose if an I/O should be used as an Input or as an Output. By default all I/O's are set as Inputs.

By default an input is triggered by a closing contact (referred to as "NO - Normally Open"). The input can be configured as "Input NC" (NC - Normally Closed) instead. (Requires firmware 8.1.3.0 or later).

Enable Advanced Configuration mode, and select Edge Configuration > I/O from the menu

I/O settings web page


For each of the six I/O pins the options are:

  • Input (default)
  • Input NC
  • Output


Use Inputs As Key Matrix

If there is a need for more than the 6 inputs available, it is possible to use the Use Inputs As Key Matrix and combine inputs as in a diode matrix, and in this way create more DAKs. By for example using 3 inputs it is possible to get 7 DAKs.

This is enabled in Advanced Configuration Mode and IO Settings:

Enable IO Matrix



The different options are:

  • 2 Inputs (input 1-2, DAK 1-3)
Input 2 Input 1 DAK key triggered
0 1 DAK1
1 0 DAK2
1 1 DAK3
0 0 Last DAK released


  • 3 Inputs (input 1-3, DAK 1-7):
Diode matrix when using 3 inputs to activate 7 DAK keys
Input 3 Input 2 Input 1 DAK key triggered
0 0 1 DAK1
0 1 0 DAK2
0 1 1 DAK3
1 0 0 DAK4
1 0 1 DAK5
1 1 0 DAK6
1 1 1 DAK7
0 0 0 Last DAK released


  • 4 Inputs (input 1-4, DAK 1-15):
Input 4 Input 3 Input 2 Input 1 DAK key triggered
0 0 0 1 DAK1
0 0 1 0 DAK2
0 0 1 1 DAK3
0 1 0 0 DAK4
0 1 0 1 DAK5
0 1 1 0 DAK6
0 1 1 1 DAK7
1 0 0 0 DAK8
1 0 0 1 DAK9
1 0 1 0 DAK10
1 0 1 1 DAK11
1 1 0 0 DAK12
1 1 0 1 DAK13
1 1 1 0 DAK14
1 1 1 1 DAK15
0 0 0 0 Last DAK released

The DAK actions are configured from Direct Access Key Settings.