Difference between revisions of "SuperUser"
From Zenitel Wiki
Line 1: | Line 1: | ||
A '''SuperUser''' is a user with access to all features in the system. A SuperUser is assigned to [[Class of service]] 16. By default there is one SUperUser in an exchange. This is the station connected to [[physical number]] 1 ([[directory number]] 101). This station is also by default set to receive the following error messages generated by the system: | A '''SuperUser''' is a user with access to all features in the system. A SuperUser is assigned to [[Class of service]] 16. By default there is one SUperUser in an exchange. This is the station connected to [[physical number]] 1 ([[directory number]] 101). This station is also by default set to receive the following error messages generated by the system: | ||
− | * '''Faulty Line''' (faulty station line) | + | * '''Faulty Line''' (faulty station line, both analog and IP stations are reported) |
* '''Faulty Board''' ([[AMC-IP]] cannot communicate with the board reported down) | * '''Faulty Board''' ([[AMC-IP]] cannot communicate with the board reported down) | ||
* '''Faulty Device''' ([[RIO]] or slave [[module]] communication failure) | * '''Faulty Device''' ([[RIO]] or slave [[module]] communication failure) |
Revision as of 23:36, 1 September 2008
A SuperUser is a user with access to all features in the system. A SuperUser is assigned to Class of service 16. By default there is one SUperUser in an exchange. This is the station connected to physical number 1 (directory number 101). This station is also by default set to receive the following error messages generated by the system:
- Faulty Line (faulty station line, both analog and IP stations are reported)
- Faulty Board (AMC-IP cannot communicate with the board reported down)
- Faulty Device (RIO or slave module communication failure)
- Faulty AGA line (AlphaNet or MultiModule audio line error)
The error reporting is configured from Exchange & System -> RCI -> Faults.