Actions

Difference between revisions of "SuperUser"

From Zenitel Wiki

Line 1: Line 1:
A '''SuperUser''' is a user with access to all features in the system. A SuperUser is assigned to [[Class of service]] 16. By default there is one SUperUser in an exchange. This is the station connected to [[physical number]] 1 ([[directory number]] 101). This station is also by default set to receive the following error messages generated by the system:
+
A '''SuperUser''' is a user with access to all features in the system. A SuperUser is assigned to [[Class of service]] 16. By default there is one SuperUser in an exchange, the station connected to [[physical number]] 1 ([[directory number]] 101). This station is also by default set to receive the following error messages generated by the system:
 
* '''Faulty Line''' (faulty station line, both analog and IP stations are reported)
 
* '''Faulty Line''' (faulty station line, both analog and IP stations are reported)
 
* '''Faulty Board''' ([[AMC-IP]] cannot communicate with the board reported down)
 
* '''Faulty Board''' ([[AMC-IP]] cannot communicate with the board reported down)

Revision as of 22:40, 1 September 2008

A SuperUser is a user with access to all features in the system. A SuperUser is assigned to Class of service 16. By default there is one SuperUser in an exchange, the station connected to physical number 1 (directory number 101). This station is also by default set to receive the following error messages generated by the system:

  • Faulty Line (faulty station line, both analog and IP stations are reported)
  • Faulty Board (AMC-IP cannot communicate with the board reported down)
  • Faulty Device (RIO or slave module communication failure)
  • Faulty AGA line (AlphaNet or MultiModule audio line error when using AGA or AE1 board)

The error reporting is configured from Exchange & System -> RCI -> Faults.