Difference between revisions of "SIP phone: Forward unattended call"
From Zenitel Wiki
Line 76: | Line 76: | ||
Note that the initiator of the call (A-subscriber) must be an intercom station, not a SIP phone. The call forwarding will not work if the A-subscriber is a SIP phone. | Note that the initiator of the call (A-subscriber) must be an intercom station, not a SIP phone. The call forwarding will not work if the A-subscriber is a SIP phone. | ||
− | [[Category:SIP]] | + | [[Category:AlphaCom - SIP Integration]] |
[[Category:Applications]] | [[Category:Applications]] |
Revision as of 16:43, 11 February 2017
The Event Type 33 - Private Ringing Outgoing can be used to forward unattended SIP calls. In order to work, it requires that the SIP device returns the SIP status "180 Ringing" when the phones starts to ring, and "200 OK" when connecting.
The forwarding function has been verified with:
- IP Dect System 6000
- X-Lite
- Grandstream GXP2000
- Cisco Call manager 6 with Cisco IP Phone 7960
- Alcatel OmniPCX (OXO) via SIP trunking
- Ascom IP Dect System
Note - The event type 33 require AMC 10.30 or later.
Configuration examples
AMC10.55 and later
- The SIP phone is 9555.
- When an intercom station calls 9555, the phone will start to ring, the ringing time is controlled by the "Private Ringing Time" timer (30 sec default). If not answered, the call will time out, and the event 33 is triggered. This event sets up a new call to directory number 9547 (which can be an intercom or another SIP phone).
- $C is needed to "speed up" the disconnection, so that the $DD command is not lost during the disconnection tone
In AlphaPro, go to Exchange and System -> Events, press Insert and create the following event:
Event 1 - Transfer to local dirno 9547, if call not answered.
Event Owner: | Stations w/ UDP, Id: 8 |
Event type: | 33 - Private Ringing Outgoing |
Subevent: | 0 |
When change to: | OFF |
When related to: | Directory Number, Id: 9555 |
Action: | $C L%1.dir |
$DD L%1.dir L9547 |
AMC10.xx prior to AMC10.55:
AMC version before 10.55 was using a virtual SIP Registrar server running on the AMC-IP card. The node number of this SIP node needs to be specified in the event.
- The SIP phone is 9555, the SIP Registrar node is node number 73.
- When an intercom station calls 9555, the phone will start to ring, the ringing time is controlled by the "Private Ringing Time" timer (30 sec default). If not answered, the call will time out, and the event 33 is triggered. This event sets up a new call to directory number 9547 (which can be an intercom or another SIP phone).
- $C is needed to "speed up" the disconnection, so that the $DD command is not lost during the disconnection tone
In AlphaPro, go to Exchange and System -> Events, press Insert and create the following event:
Event 1 - Transfer to local dirno 9547, if call not answered.
Event Owner: | Stations w/ UDP, Id: 8 |
Event type: | 33 - Private Ringing Outgoing |
Subevent: | 0 |
When change to: | OFF |
When related to: | Directory Number, Node: 73, Id: 9555 |
Action: | $C L%1.dir |
$DD L%1.dir L9547 |
Note that the initiator of the call (A-subscriber) must be an intercom station, not a SIP phone. The call forwarding will not work if the A-subscriber is a SIP phone.