Difference between revisions of "Duplex Conference 10.45"
From Zenitel Wiki
(→Force old AGA conference) |
(→Mixing in DSP) |
||
| Line 8: | Line 8: | ||
The new duplex conference do the mixing in the DSP of the AMC-IP board. No AGA board is required, neither any AlphaPro configuration. | The new duplex conference do the mixing in the DSP of the AMC-IP board. No AGA board is required, neither any AlphaPro configuration. | ||
| + | This means that the conference audio is limited to 7kHz bandwidth, also for internal members. | ||
== IP calls supported == | == IP calls supported == | ||
Revision as of 11:18, 18 April 2008
| This AlphaCom feature is under development and is not yet released! |
|---|
The duplex conference feature is currently being upgraded in the AMC SW. The revised Duplex Conference will be released soon, in some version 10.45. See Duplex Conference for description of the existing version. The remaining text describes the difference from the old version. This text will eventually be merged into the main article.
Contents
Whats new
Mixing in DSP
The new duplex conference do the mixing in the DSP of the AMC-IP board. No AGA board is required, neither any AlphaPro configuration.
This means that the conference audio is limited to 7kHz bandwidth, also for internal members.
IP calls supported
Conversation timeout
The Conversation timeout is now active on duplex conference members, in exactly same way as in a normal conversation. Each member starts its own timer when joining the conference, so each member is disconnected individually when her time is out.