Actions

Difference between revisions of "Turbine Software Upgrade"

From Zenitel Wiki

(Upgrade TCIS or TKIS-2 (Turbine Compact) from version 3.0.x.x)
(Installing Recovery OS)
 
(111 intermediate revisions by 5 users not shown)
Line 1: Line 1:
{{APS}}
+
{{AEIPS}}
This article describes how to upgrade the software of the [[:Category:Turbine|Turbine series of intercom devices]] via the '''web interface''' of the station. This process is best used for upgrading only a few stations.  
+
This article describes how to upgrade the software of the [[:Category:Stations#Turbine_stations|Turbine series of intercom devices]] via the '''web interface''' of the station.  
  
{{Note}} It is possible to upgrade the software using the VS-IMT tool, see the article [[VS-IMT Upgrade Stations]]. The [[IMT|VS-IMT]] tool allows mass upgrade of stations.
+
{{Note|
 +
* ''The procedure described in this article is applicable to the following devices: '''TCIS-x''', '''TCIV-x''', '''TKIS-2''', '''TMIS-x''', '''TFIE-x''', '''TKIE-x''', '''TFIX-x''', '''IP-LCM''', '''ECPIR-3P''', '''Exigo IP speakers'''. '''Exigo Network Amplifiers''', and '''ENA-2060DC1'''''
 +
* ''For mass upgrade of stations it is recommended to use the [[IMT|VS-IMT]] tool, see the article [[IMT - Discover & Upgrade]].''
 +
* ''Using Turbine version 4.7.3.2 or higher, you can downgrade to VSF-Turbine version 4.2.3.17, but not to any older version.''
 +
* ''There is a separate Upgrade procedure for [[INCA Station Software upgrade|INCA IP stations.]]''
 +
* ''If the station is used in SIP mode, also [[Automatic Software Upgrade|Automatic Updates]] can be defined.'' }}
 +
<div style="float:right;"> <youtube width="300" height="180">WS-ysJCOYcI</youtube> </div>
  
Note that there is a separate Upgrade procedure for [[INCA Station Software upgrade|INCA IP stations]].
+
There are two ways of updating the software of these devices from the web interface:
 +
* By using an [[#Upgrade by using an external TFTP server|external TFTP server]], or
 +
* By uploading an image file (or drag and drop the image file) to the "Software Upgrade" page of the station. '''Note:''' This option is available only to [[#Devices with Recovery OS|stations with Recovery OS]].
  
If the station is in SIP mode, [[Automatic Software Upgrade|Automatic Updates]] can also be defined.
+
== Upgrade using the IMT-tool==
 +
Upgrade of station can be done from the Windows PC tool [[IMT|VS-IMT]], see the article [[IMT - Discover & Upgrade]].
  
==Upgrade Turbine from version 4.2.x.x or 4.7.x.x to newer version==
+
<br>
  
 +
== Upgrade by using an external TFTP server ==
 
===Prerequisites===
 
===Prerequisites===
# A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
+
# Current version '''must be 4.7.3.2 or higher'''. To upgrade from older versions, [[Upgrading Turbine Devices running firmware between 3.0.x.x and 4.2.x.x|see this article]].
# Download the software package '''[[Downloads#Turbine_stations|sti-4.7.3.2.zip]]''', and unzip the package and store the files in a different folder on your PC.
+
# A TFTP Server must be available on your laptop. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
 +
# Download the software package '''[[Downloads#Stations_and_Devices|vsft-8.x.x.x.zip]]''', and '''unzip the package''' and store the files in a folder on your PC.
 
# Check if your local firewall is '''not''' blocking incoming ping/ICMP  (Turbine station is pinging TFTP Server during update process)
 
# Check if your local firewall is '''not''' blocking incoming ping/ICMP  (Turbine station is pinging TFTP Server during update process)
 +
<br>
  
 
=== Upgrade procedure ===
 
=== Upgrade procedure ===
The upgrade is  a two step process:
+
# Start the TFTP server program and click '''Browse''', and select the folder where the 8.x.x.x software files are located
* First step is to update the '''bootloader environment'''
+
# [[Logging into an IP Station|Log on to the Turbine Station]] web interface. Select '''Station Administration''' > '''Manual Upgrade'''
* Second step is to update the station '''firmware'''  
+
# Enter the IP address of the '''TFTP server''' (I.e. the IP address of your laptop)
 +
# Enter Image file: '''vsft-8.x.x.x'''
 +
# '''Save Settings'''
 +
# '''Upgrade'''
  
1. Start the TFTP server program and click '''Browse''', and select the folder where the version 4.7.3.2 software files are located
+
[[File:TFTP Upgrade 8231.PNG|thumb|left|700px|Example: Upgrade to the latest the firmware from TFTP Server 10.9.8.188]]
 
 
[[File:Upgrade4730tftp.PNG|thumb|left|500px|TFTP Server - Browse to the folder where the software files are located]]
 
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
2.  [[Logging into an IP Station|Log on to the Turbine Station]] web interface. Default login credentials are '''admin''' and '''alphaadmin'''. Select '''Station Administration''' > '''Manual Upgrade'''
 
  
3.  Enter the IP address of the '''TFTP server''' (I.e. the IP address of your PC)
+
The device will restart with the new firmware installed.  
  
4. Enter the image file prefixed by "boot": '''boot/sti-4.7.3.2''', and click '''Save settings'''. Wait a few seconds for the page to refresh, then press '''Upgrade'''.  The station will now reboot. This process will upgrade the boot loader environment. For more details about this process, see [[Turbine bootloader upgrade]]
+
The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the '''Log viewer''' tab in the TFTP server program.
  
[[File:Turbine Bootloader 47.PNG|thumb|left|500px|Load '''boot/sti-4.7.3.2''' to upgrade the boot environment. Press '''Save Settings''', then '''Upgrade''']]
+
<br>
<br style="clear:both;" />
 
  
5. When the station is back online, enter the image file: '''sti-4.7.3.2''', and click '''Save settings'''. Wait a few seconds for the page to refresh, then press '''Upgrade'''. This process will upgrade the station firmware.
+
== Devices with Recovery OS ==
 +
As from firmware version 5.1.3.0 a Recovery Operating System, '''Recovery OS''', has been added in addition to the Main OS.
  
[[File:TurbineUpgrade4730.PNG|thumb|left|500px|Load '''sti-4.7.3.2''' to upgrade the station firmware]]
+
{{note|
<br style="clear:both;" />
+
* ''"Recovery OS" is available only on Turbine devices that '''come from factory''' with software version 5.1 or higher preinstalled (approx. from March 2020)'' <br>
 +
* ''When upgrading to firmware 5.1. or later in the field, "Recovery OS" will not be included'' }}
  
The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the '''Log viewer''' tab in the TFTP server program.
+
The Recovery OS supports:
 +
* Software upgrade in IPv6 network
 +
* Software upgrade when device is using [[IEEE 802.1X|802.1X authentication]]
 +
* Software upgrade via HTTP/HTTPS protocol using '''.swu''' image
  
== Upgrade TCIS or TKIS-2 (Turbine Compact) from version 3.0.x.x ==
+
Devices with Recovery OS support both the new method for software upgrade (using '''.swu''' file), as well as the original method (using '''.zip''' file and TFTP server).
The upgrade is a three-step process:
 
# Install version 3.0.3.5, then
 
# Install version 4.7.3.0, then
 
# Install version 4.7.3.2
 
  
===Prerequisites===
+
[[File:Turbine Upgr Both.PNG|thumb|left|500px|Choose between upgrading using '''.swu''' file, or using TFTP server and '''.zip''' file]]
# A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
+
<br style="clear:both;" />
# Download the software package '''[[Downloads#Turbine_stations|tsi-3.0.3.5.zip]]''', and unzip the package and store the files in a folder on your PC.
 
# Download the software package '''[[Downloads#Turbine_stations|sti-prod-4.7.3.0.zip]]''', and unzip the package and store the files in a different folder on your PC.
 
# Download the software package '''[[Downloads#Turbine_stations|sti-4.7.3.2.zip]]''', and unzip the package and store the files in a different folder on your PC.
 
# Check if your local firewall is '''not''' blocking incoming ping/ICMP  (Turbine station is pinging TFTP Server during update process)
 
  
=== Upgrade procedure ===
+
In order to upgrade software using the .swu file:
 +
* Press the ''upper''  '''Start Upgrade''' button
 +
* The station will now reboot, and start in "Recovery OS" mode
  
1. Start the TFTP server program and click '''Browse''', and select the folder where the version 3.0.3.5 software files are located
+
[[File:Turbine Recovery.PNG|thumb|left|500px|Turbine device in "Recovery OS" mode]]
 +
<br style="clear:both;" />
  
[[File:TFTP 3035.PNG|thumb|left|500px|TFTP Server - Browse to the folder where the software files are located]]
+
* Now click inside the "Software Update" field and upload the image file (e.g. '''vsft-8.2.3.1.swu'''), or drag and drop the image file onto this field
<br style="clear:both;" />
+
* The progress of the installation is shown. When finished installation the station will reboot, and start in regular mode.
  
2.  Log on to the Turbine Station web interface. Default login credentials are '''admin''' and '''alphaadmin'''. Select '''Station Administration''' > '''Manual Upgrade'''
+
<br>
  
3. Enter the IP address of the '''TFTP server''' (I.e. the IP address of your PC)
+
== Installing Recovery OS ==
 +
Recovery OS is not included in Turbine devices produced before approx. March 2020. It is possible to install Recover OS by following this procedure:
  
4. Enter the image file: '''tsi-3.0.3.5''', and click '''Save settings'''
+
# Start the TFTP server program and click '''Browse''', and select the folder where the 8.x.x.x software files are located
 +
# [[Logging into an IP Station|Log on to the Turbine Station]] web interface. Select '''Station Administration''' > '''Manual Upgrade'''
 +
# Enter the IP address of the '''TFTP server''' (I.e. the IP address of your laptop)
 +
# Enter Image file: '''recovery/vsft-8.x.x.x''' (Note the text "recovery" in front of the software version).
 +
# '''Save Settings'''
 +
# '''Upgrade'''
  
[[File:TurbineTo 3035.PNG|thumb|left|500px|Load '''tsi-3.0.3.5''' via the station web interface]]
+
[[File:TFTP Recovery 8231.PNG|thumb|left|700px|Installing "Recovery OS" on a Turbine device]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
:The station will now contact the TFTP server and download the files. The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the '''Log viewer''' tab in the TFTP server program.
 
  
 +
The device will restart with the firmware installed.
  
When the station is up and running again, the next step is to install version 4.7.3.0:
+
The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the '''Log viewer''' tab in the TFTP server program.
  
5. In the TFTP server program, '''Browse''' to the folder where the version 4.7.3.0 software files are located
+
When going to '''Station Administration''' > '''Manual Upgrade''', you should now have the option do software upgrade using the Recovery OS, as described in [[#Devices with Recovery OS]].
  
6. In the Turbine web interface enter the image file: '''tsi2sti-4.7.3.0.ipk''', and '''Save settings'''
+
<br>
  
[[File:TurbineTo4730.PNG|thumb|left|500px|Installing '''tsi2sti-4.7.3.0.ipk''' via the station web interface]]
+
==Upgrade from versions between 3.0 and 4.2==
<br style="clear:both;" />
+
To upgrade devices currently running a version between 3.0.x.x and 4.2.x.x, see article: [[Upgrading Turbine Devices running firmware between 3.0.x.x and 4.2.x.x]]
  
The station will again contact the TFTP server and download and install the required files.
+
<br>
  
7. The final step is to install version 4.7.3.2. This process is described in the first paragraph of this article: [[#Upgrade Turbine from version 4.2.x.x or 4.7.x.x to newer version]]
+
== Upgrade in 802.1x environment ==
 +
Devices with Recovery OS can be upgraded also when the station uses 801.1x authentication. For more details, see [[IEEE 802.1X]]
  
==Upgrade from version 3.1, 4.0, 4.1==
+
<br>
For upgrade from version 3.1, 4.0, 4.1 see article: [[Upgrade Turbine stations from 3.1, 4.0 or 4.1]]
 
  
 
==Troubleshooting==
 
==Troubleshooting==
Line 98: Line 115:
 
*For Windows10: [http://www.sysprobs.com/enable-ping-reply-and-ftp-traffic-in-windows-10-and-server http://www.sysprobs.com/enable-ping-reply-and-ftp-traffic-in-windows-10-and-server]
 
*For Windows10: [http://www.sysprobs.com/enable-ping-reply-and-ftp-traffic-in-windows-10-and-server http://www.sysprobs.com/enable-ping-reply-and-ftp-traffic-in-windows-10-and-server]
  
 +
If the upgrade is not successful when using the default static IP, it may be due to a network setting.
 +
* Please check the station's subnet mask. If it is 255.255.0.0, change it to 255.255.255.0 and try again
  
 
[[Category: Turbine - Restore Factory Defaults and Software Upgrade]]
 
[[Category: Turbine - Restore Factory Defaults and Software Upgrade]]

Latest revision as of 15:00, 6 June 2024

AEIPS.png

This article describes how to upgrade the software of the Turbine series of intercom devices via the web interface of the station.

Note icon
  • The procedure described in this article is applicable to the following devices: TCIS-x, TCIV-x, TKIS-2, TMIS-x, TFIE-x, TKIE-x, TFIX-x, IP-LCM, ECPIR-3P, Exigo IP speakers. Exigo Network Amplifiers, and ENA-2060DC1
  • For mass upgrade of stations it is recommended to use the VS-IMT tool, see the article IMT - Discover & Upgrade.
  • Using Turbine version 4.7.3.2 or higher, you can downgrade to VSF-Turbine version 4.2.3.17, but not to any older version.
  • There is a separate Upgrade procedure for INCA IP stations.
  • If the station is used in SIP mode, also Automatic Updates can be defined.


There are two ways of updating the software of these devices from the web interface:

Upgrade using the IMT-tool

Upgrade of station can be done from the Windows PC tool VS-IMT, see the article IMT - Discover & Upgrade.


Upgrade by using an external TFTP server

Prerequisites

  1. Current version must be 4.7.3.2 or higher. To upgrade from older versions, see this article.
  2. A TFTP Server must be available on your laptop. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
  3. Download the software package vsft-8.x.x.x.zip, and unzip the package and store the files in a folder on your PC.
  4. Check if your local firewall is not blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process)


Upgrade procedure

  1. Start the TFTP server program and click Browse, and select the folder where the 8.x.x.x software files are located
  2. Log on to the Turbine Station web interface. Select Station Administration > Manual Upgrade
  3. Enter the IP address of the TFTP server (I.e. the IP address of your laptop)
  4. Enter Image file: vsft-8.x.x.x
  5. Save Settings
  6. Upgrade
Example: Upgrade to the latest the firmware from TFTP Server 10.9.8.188



The device will restart with the new firmware installed.

The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.


Devices with Recovery OS

As from firmware version 5.1.3.0 a Recovery Operating System, Recovery OS, has been added in addition to the Main OS.

Note icon
  • "Recovery OS" is available only on Turbine devices that come from factory with software version 5.1 or higher preinstalled (approx. from March 2020)
  • When upgrading to firmware 5.1. or later in the field, "Recovery OS" will not be included


The Recovery OS supports:

  • Software upgrade in IPv6 network
  • Software upgrade when device is using 802.1X authentication
  • Software upgrade via HTTP/HTTPS protocol using .swu image

Devices with Recovery OS support both the new method for software upgrade (using .swu file), as well as the original method (using .zip file and TFTP server).

Choose between upgrading using .swu file, or using TFTP server and .zip file


In order to upgrade software using the .swu file:

  • Press the upper Start Upgrade button
  • The station will now reboot, and start in "Recovery OS" mode
Turbine device in "Recovery OS" mode


  • Now click inside the "Software Update" field and upload the image file (e.g. vsft-8.2.3.1.swu), or drag and drop the image file onto this field
  • The progress of the installation is shown. When finished installation the station will reboot, and start in regular mode.


Installing Recovery OS

Recovery OS is not included in Turbine devices produced before approx. March 2020. It is possible to install Recover OS by following this procedure:

  1. Start the TFTP server program and click Browse, and select the folder where the 8.x.x.x software files are located
  2. Log on to the Turbine Station web interface. Select Station Administration > Manual Upgrade
  3. Enter the IP address of the TFTP server (I.e. the IP address of your laptop)
  4. Enter Image file: recovery/vsft-8.x.x.x (Note the text "recovery" in front of the software version).
  5. Save Settings
  6. Upgrade
Installing "Recovery OS" on a Turbine device



The device will restart with the firmware installed.

The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.

When going to Station Administration > Manual Upgrade, you should now have the option do software upgrade using the Recovery OS, as described in #Devices with Recovery OS.


Upgrade from versions between 3.0 and 4.2

To upgrade devices currently running a version between 3.0.x.x and 4.2.x.x, see article: Upgrading Turbine Devices running firmware between 3.0.x.x and 4.2.x.x


Upgrade in 802.1x environment

Devices with Recovery OS can be upgraded also when the station uses 801.1x authentication. For more details, see IEEE 802.1X


Troubleshooting

In the case the upgrade is not successful it may be due to a windows setting.

If the upgrade is not successful when using the default static IP, it may be due to a network setting.

  • Please check the station's subnet mask. If it is 255.255.0.0, change it to 255.255.255.0 and try again