Actions

Difference between revisions of "VSF-Display Series 8.1 Release Notes"

From Zenitel Wiki

(Improvements)
 
(10 intermediate revisions by the same user not shown)
Line 1: Line 1:
* Previous Release - [[VSF-Fortitude8 8.0 Release Notes]]
+
* Next Release - [[VSF-Display Series 8.2 Release Notes]]
  
 
This document provides the release notes for VSFF8MP 8.1 with incremental bug fix releases. The release notes for VSF-Fortitude8 8.1 describe new features, improvements and issues fixed after vsff8mp-7.5.3.2.
 
This document provides the release notes for VSFF8MP 8.1 with incremental bug fix releases. The release notes for VSF-Fortitude8 8.1 describe new features, improvements and issues fixed after vsff8mp-7.5.3.2.
Line 12: Line 12:
 
*vsff8mp-prod-8.1.3.x - Used in production- and recovery upgrades.
 
*vsff8mp-prod-8.1.3.x - Used in production- and recovery upgrades.
  
'''Version:''' 8.1.3.0<br>
+
'''Version:''' 8.1.3.2<br>
'''Date:''' 02.02.2024 <br>
+
'''Date:''' 02.05.2024 <br>
 
'''Status:''' General Availability<br>
 
'''Status:''' General Availability<br>
 +
 +
=VSFF8MP 8.1.3.2=
 +
==Fixed Issues==
 +
=== MTN-4420 Cyber security update===
 +
A software update to mitigate a critical cyber security issue
 +
 +
<br>
 +
 +
 +
=VSFF8MP 8.1.3.1=
 +
==Fixed Issues==
 +
=== DS-817 Zenitel Connect Pro 1.1 compatible===
 +
Compatible with Zenitel Connect Pro 1.1. No changes for ICX-AlphaCom, SIP and IC-EDGE mode.
 +
 +
 +
<br>
  
 
=VSFF8MP 8.1.3.0=
 
=VSFF8MP 8.1.3.0=
Line 25: Line 41:
  
 
==Issues fixed==
 
==Issues fixed==
=== MTN-4346 User experience: Audio output level too low when in open duplex conversation with imx6 and im8 based devices ===
+
=== MTN-4330 Call is now established only after highlight and when scrolling through address list it is not able to trigger accidental call. ===
The gain was increased after AEC but before the audio signal compander (with AGC function) so transmitted signal level reaches target level of -23 dBFS with “nominal voice input”
 
 
 
=== MTN-4288 TCIV+ video stream is now working properly with Ganz Control VMS===
 
There was an issue with video stream in Ganz Control VMS, this is now fixed.
 
 
 
=== MTN-4284 Relay activation by Pin code can now play audio messages ===
 
Activating of Relay caused by PIN-code function will now trigger audio messages if it is configured.
 
 
 
=== MTN-4230 Fixed issue where audio is not heard when station is using SRTP===
 
When stations are registered to a SIP server using TLS, Secure SIP and SRTP, audio was heard only on the caller side. This is now fixed, and audio can be heard on both sides.
 
 
 
=== MTN-4219 'DAVC' and 'Offline Relays' were not visible in the station web menu in ICX-AlphaCom mode===
 
The DAVC and Offline Relays settings are now available in the station web menu in ICX-AlphaCom mode.
 
 
 
=== MTN-4217 Allowing underscore in SNMP community string===
 
Underscore is now allowed in the SNMP community string.
 
  
 
<br>
 
<br>
  
==Known Issues==
 
=== MTN-4333 HD-Audio mode not working using digital microphone input===
 
Audio is distorted when digital microphone is used. Audio is OK if using analogue microphone input
 
 
===MTN-4121 Known issue: Asterisk discards alternative profiles===
 
Default setting for ITSV-5 sends 3 types (BP & MP & HP). However, Asterisk discards all but the first profile it receives (HP in this case). Since only the "Baseline profile" is supported on the device the video doesn't load. A workaround to this issue is to select "Baseline profile" as the H.264 profile type on the ITSV-5.
 
 
The issue has been reported and documented here: https://issues.asterisk.org/jira/browse/ASTERISK-29182
 
 
 
<br>
 
  
  

Latest revision as of 13:47, 3 October 2024

This document provides the release notes for VSFF8MP 8.1 with incremental bug fix releases. The release notes for VSF-Fortitude8 8.1 describe new features, improvements and issues fixed after vsff8mp-7.5.3.2.

Release info

Name: VSF-Fortitude8
Description: vsff8mp is a firmware for Zenitel display series including the following devices: ZMK-1

The firmware is delivered in two different files:

  • vsff8mp-8.1.3.x - Used for standard in-field upgrades
  • vsff8mp-prod-8.1.3.x - Used in production- and recovery upgrades.

Version: 8.1.3.2
Date: 02.05.2024
Status: General Availability

VSFF8MP 8.1.3.2

Fixed Issues

MTN-4420 Cyber security update

A software update to mitigate a critical cyber security issue



VSFF8MP 8.1.3.1

Fixed Issues

DS-817 Zenitel Connect Pro 1.1 compatible

Compatible with Zenitel Connect Pro 1.1. No changes for ICX-AlphaCom, SIP and IC-EDGE mode.



VSFF8MP 8.1.3.0

Improvements

MTN-4156 Added option for using Normally Closed switch on I/O Pins configured as input

The default input configuration is Normally Open and the switch contact needs to close to activate the function. A new option “Input NC” has been added to the I/O Pin configuration, which inverts the default behavior and the function is activated on switch open.


Issues fixed

MTN-4330 Call is now established only after highlight and when scrolling through address list it is not able to trigger accidental call.