Difference between revisions of "IP Desktop with Video Display - Release Notes"
From Zenitel Wiki
Line 4: | Line 4: | ||
− | === Version | + | === Version 2.2 === |
− | * | + | * Fixed a bug where display text fragments were erroneously displayed |
+ | * Added a touch calibration dialog to the display | ||
+ | === Version 2.1 === | ||
+ | * Fixed a display bug when restarting the station via display | ||
+ | === Version 2.0 === | ||
+ | * Added SIP-/PULSE-Support | ||
+ | * Revised display handling and output | ||
− | === Version 1. | + | === Version 1.13 === |
− | * Fixed | + | * Fixed an index error in the camera type list |
− | * | + | * Fixed an endless loop when trying to access an invalid camera URL |
+ | * The resync timer for the camera stream will now be stopped, when syncronisation is successful | ||
+ | === Version 1.12 === | ||
+ | * Fixed a bug when entering an IP address and a subnet mask that don't "fit" | ||
+ | === Version 1.11 === | ||
+ | * Added factory reset via display | ||
+ | * Increased the length of the camera type name in the dynamic camera type list to 100 characters | ||
+ | * Increased camera count to 80 | ||
+ | * Increased camera name to 15 characters | ||
− | === Version 1. | + | === Version 1.10 === |
− | * | + | * Removed the MJPG streaming path for Grundig cameras |
− | * | + | * Added a dynamic list for up to 3 custom camera types including streaming path |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | === Version 1.9 === | ||
+ | * Fixed a bug where some display texts weren't cleared correctly | ||
+ | * Added the MJPG streaming path for Grundig cameras | ||
=== Version 1.8 === | === Version 1.8 === | ||
Line 61: | Line 41: | ||
* Changed the URL for Axis cameras from "mjpg/video.mjpg" to "axis- cgi/mjpg/video.cgi" | * Changed the URL for Axis cameras from "mjpg/video.mjpg" to "axis- cgi/mjpg/video.cgi" | ||
* Changed the MJPG stream function to be compatible with older non-RFC-compliant Axis cameras | * Changed the MJPG stream function to be compatible with older non-RFC-compliant Axis cameras | ||
− | * Changed the | + | * Changed the behavior of the LED (the "auo" DIP message does no longer turn off the LED) |
* Fixed a web server bug that was causing problems with digest authentication under IE9+ | * Fixed a web server bug that was causing problems with digest authentication under IE9+ | ||
* The "aue" DIP message is now ignored | * The "aue" DIP message is now ignored | ||
Line 67: | Line 47: | ||
* Fixed a bug that incorrectly reconnected a camera, when another camera is manually selected during a connected call | * Fixed a bug that incorrectly reconnected a camera, when another camera is manually selected during a connected call | ||
* Changed the LED time base | * Changed the LED time base | ||
− | * The | + | * The station now displays an error screen when trying to stream a video in the wrong format/resolution |
* Fixed a timing problem when trying to connect to the camera of an incoming call, when manual camera selection is active | * Fixed a timing problem when trying to connect to the camera of an incoming call, when manual camera selection is active | ||
+ | === Version 1.7 === | ||
+ | * Added detection of missing DIP messages | ||
+ | * Changed font to a fixed width font | ||
+ | * Increased camera count to 48 | ||
+ | * Added manual camera selection with passcode authentication via display | ||
+ | * Added automatic camera switching, if more than one camera is added to a remote station | ||
+ | * Overhauled the UI and web interface | ||
+ | * Added a download/upload functionality for the camera list | ||
+ | * The station does not need to reboot anymore, after changing the settings | ||
+ | * Added factory reset via web interface | ||
+ | === Version 1.6 === | ||
+ | * Fixed a bug where the display wasn't cleared correctly in some cases | ||
+ | * Font improvements (narrow characters are now centered instead of left aligned) | ||
− | === Version 1. | + | === Version 1.5 === |
− | * | + | * Implemented encryption of the firmware file |
− | * | + | * Workflow adaptation |
+ | === Version 1.4 === | ||
+ | * Implemented DIP protocol via internal serial interface | ||
+ | * Implemented bootloader with firmware upload via web interface | ||
+ | === Version 1.3 === | ||
+ | * Fixed a bug where the LEDs weren't correctly updated in some scenarios | ||
− | === Version 1. | + | === Version 1.2 === |
− | * | + | * Fixed a problem with the web server, that could cause problems, if someone tries to access the web interface, while the device has initiated a reboot |
− | + | * Fixed a bug where the LEDs weren't correctly switched off when the state changed from "incoming call" to "idle" | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | * Fixed a | ||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | === Version 1.1 === | ||
+ | * Fixed a network bug in DHCP mode | ||
+ | * Improved network stability | ||
+ | === Version 1.0 === | ||
+ | * First release | ||
[[Category: Release notes]] | [[Category: Release notes]] |
Revision as of 12:57, 11 May 2016
Note: The release notes are for the LCD screen in the IP Desktop Station with Video Display - 1408001635.
Release notes for the IP desktop station is here.
Contents
Version 2.2
- Fixed a bug where display text fragments were erroneously displayed
- Added a touch calibration dialog to the display
Version 2.1
- Fixed a display bug when restarting the station via display
Version 2.0
- Added SIP-/PULSE-Support
- Revised display handling and output
Version 1.13
- Fixed an index error in the camera type list
- Fixed an endless loop when trying to access an invalid camera URL
- The resync timer for the camera stream will now be stopped, when syncronisation is successful
Version 1.12
- Fixed a bug when entering an IP address and a subnet mask that don't "fit"
Version 1.11
- Added factory reset via display
- Increased the length of the camera type name in the dynamic camera type list to 100 characters
- Increased camera count to 80
- Increased camera name to 15 characters
Version 1.10
- Removed the MJPG streaming path for Grundig cameras
- Added a dynamic list for up to 3 custom camera types including streaming path
Version 1.9
- Fixed a bug where some display texts weren't cleared correctly
- Added the MJPG streaming path for Grundig cameras
Version 1.8
- Fixed a bug where, in manual camera selection, the first element in the list always required a passcode, even when passcode authentication was disabled
- Changed the URL for Axis cameras from "mjpg/video.mjpg" to "axis- cgi/mjpg/video.cgi"
- Changed the MJPG stream function to be compatible with older non-RFC-compliant Axis cameras
- Changed the behavior of the LED (the "auo" DIP message does no longer turn off the LED)
- Fixed a web server bug that was causing problems with digest authentication under IE9+
- The "aue" DIP message is now ignored
- Changed the fallback settings for username and password to "admin"/"alphaadmin"
- Fixed a bug that incorrectly reconnected a camera, when another camera is manually selected during a connected call
- Changed the LED time base
- The station now displays an error screen when trying to stream a video in the wrong format/resolution
- Fixed a timing problem when trying to connect to the camera of an incoming call, when manual camera selection is active
Version 1.7
- Added detection of missing DIP messages
- Changed font to a fixed width font
- Increased camera count to 48
- Added manual camera selection with passcode authentication via display
- Added automatic camera switching, if more than one camera is added to a remote station
- Overhauled the UI and web interface
- Added a download/upload functionality for the camera list
- The station does not need to reboot anymore, after changing the settings
- Added factory reset via web interface
Version 1.6
- Fixed a bug where the display wasn't cleared correctly in some cases
- Font improvements (narrow characters are now centered instead of left aligned)
Version 1.5
- Implemented encryption of the firmware file
- Workflow adaptation
Version 1.4
- Implemented DIP protocol via internal serial interface
- Implemented bootloader with firmware upload via web interface
Version 1.3
- Fixed a bug where the LEDs weren't correctly updated in some scenarios
Version 1.2
- Fixed a problem with the web server, that could cause problems, if someone tries to access the web interface, while the device has initiated a reboot
- Fixed a bug where the LEDs weren't correctly switched off when the state changed from "incoming call" to "idle"
Version 1.1
- Fixed a network bug in DHCP mode
- Improved network stability
Version 1.0
- First release