Actions

Difference between revisions of "IP Desktop Station LED Indications"

From Zenitel Wiki

Line 1: Line 1:
 
====Station LED====
 
====Station LED====
 
LED4 - Red 5mm LED on board rear side, also seen through front plate.
 
LED4 - Red 5mm LED on board rear side, also seen through front plate.
[[File:IP Master Indications 1.PNG|left|thumb|200px|Station LED]]
+
[[File:IPDeskLED.png|left|thumb|200px|Station LED]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
 
'''Blinking at 1 second intervals:'''<br/>
 
'''Blinking at 1 second intervals:'''<br/>

Revision as of 10:06, 26 October 2016

Station LED

LED4 - Red 5mm LED on board rear side, also seen through front plate.

Station LED


Blinking at 1 second intervals:
Station has no connection to the AlphaCom XE Audio Server.

Possible reasons:

  • No connection to Ethernet
  • Wrong AlphaCom IP address configured
  • Invalid IP address
  • No gateway or wrong gateway to the AlphaCom XE Audio Server

Blinking at 5 second intervals:
Station connected but NOT registered in the AlphaCom XE Audio Server.

Possible reasons:

  • Station has not been programmed in AlphaPro
  • Missing IP Station license in AlphaCom XE Audio Server

No blinking:

Possible reasons:

  • Station connected and registered to the AlphaCom XE Audio Server
  • Station not powered up (if no other LEDs are active)