Difference between revisions of "ELSIR-10C"
From Zenitel Wiki
(→Configuration) |
|||
Line 8: | Line 8: | ||
The loudspeaker can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure. | The loudspeaker can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure. | ||
− | *[[ | + | * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] |
*[[Adding station to existing system (Edge)|Edge mode]] | *[[Adding station to existing system (Edge)|Edge mode]] | ||
*[[SIP Intercom Configuration|SIP mode]] | *[[SIP Intercom Configuration|SIP mode]] |
Revision as of 08:10, 25 March 2021
Contents
Getting started
Configuration
The loudspeaker can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure.
Restore Factory Defaults and Software Upgrade
The ELSIR-10C IP Speaker has a Turbine kit TKIS-2 inside.
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
Connectors, Indicators and Dimensions
The ELSIR-10C IP Speaker has a Turbine kit TKIS-2 inside.
Software Requirements
This station is fully supported as from AlphaCom version 11.2.3.7