Actions

Difference between revisions of "SuperUser"

From Zenitel Wiki

Line 3: Line 3:
 
* '''Faulty Board''' (If [[AMC-IP]] can no longer communicate with the board this error message is generated)
 
* '''Faulty Board''' (If [[AMC-IP]] can no longer communicate with the board this error message is generated)
 
* '''Faulty Device''' ([[RIO]] or slave [[module]] communication failure)
 
* '''Faulty Device''' ([[RIO]] or slave [[module]] communication failure)
* '''Faulty AGA line''' ([[AlphaNet]] or [[MultiModule]] audio line error when using [[AGA]] or [[AE1]] board)
+
* '''Faulty AGA line''' ([[AlphaNet]] or [[MultiModule]] audio line error when interconnected by [[AGA]] or [[AE1]] board)
  
 
The error reporting is configured from [[Exchange_%26_System_%28AlphaPro%29#Faults|Exchange & System -> RCI -> Faults]].
 
The error reporting is configured from [[Exchange_%26_System_%28AlphaPro%29#Faults|Exchange & System -> RCI -> Faults]].

Revision as of 22:42, 1 September 2008

A SuperUser is a user with access to all features in the system. A SuperUser is assigned to Class of service 16. By default there is one SuperUser in an exchange, the station connected to physical number 1 (directory number 101). This station is also by default set to receive the following error messages generated by the system:

  • Faulty Line (faulty station line, both analog and IP stations are reported)
  • Faulty Board (If AMC-IP can no longer communicate with the board this error message is generated)
  • Faulty Device (RIO or slave module communication failure)
  • Faulty AGA line (AlphaNet or MultiModule audio line error when interconnected by AGA or AE1 board)

The error reporting is configured from Exchange & System -> RCI -> Faults.