Difference between revisions of "TA-23"
From Zenitel Wiki
(→Handset operation) |
(→Handset operation) |
||
Line 30: | Line 30: | ||
==Handset operation== | ==Handset operation== | ||
[[File:TFIE SpeakerButton.PNG|thumb|200px|Toggle Button]] | [[File:TFIE SpeakerButton.PNG|thumb|200px|Toggle Button]] | ||
− | When " | + | When "Accessory" is set to "Turbine Handset", the station is by default in loudspeaking mode, i.e. the audio is routed to the speaker and microphone of the front panel of the TFIE station, as well as to the handset speaker. The handset microphone is disabled. |
When a call is received, the handset mode can be activated in two ways: | When a call is received, the handset mode can be activated in two ways: |
Revision as of 08:20, 9 February 2018
The TA-23 handset comes with a Push-To-Talk (PTT) button and 3.5-meter long cable.
Contents
Highlights
- Rugged handset for Industrial application
- PTT-key for simplex operation in extremely noisy environments
- Noise-cancelling microphone
- High quality digital background noise reduction*
- HD-voice compatible*
- IP Rating: IP66
- Designed for Turbine Industrial Intercoms
*when used with Turbine Industrial Intercoms
Connecting the TA-23 handset to the TFIE station
- Open the TFIE Enclosure
- Plug the IDC connectors of the Handset cable into the J8 terminal block according to the pin configuration below.
Configuration
- Log on to the station web interface
- In Station Main > Main Settings, set Accessory to "Turbine Handset".
Handset operation
When "Accessory" is set to "Turbine Handset", the station is by default in loudspeaking mode, i.e. the audio is routed to the speaker and microphone of the front panel of the TFIE station, as well as to the handset speaker. The handset microphone is disabled.
When a call is received, the handset mode can be activated in two ways:
- By pressing the "Toggle" button on the front panel (TFIE-1 only). In handset mode the audio in the front panel is muted.
- By pressing the PTT button in the handset.
The "Toggle" button lets you toggle between loudspeaking and handset mode. The LED in the toggle button shows the status:
- Green LED = Loudspeaking mode
- Red LED = Handset mode
When the TFIE station returns to idle, e.g. when a call is ended, the station will automatically return to loudspeaking mode.
Dimensions