Actions

Difference between revisions of "ASLT - AlphaCom Subscriber Line Board"

From Zenitel Wiki

Line 1: Line 1:
 
[[Image:1009101010.PNG|thumb|250px|ASLT Subscriber Line Board]]
 
[[Image:1009101010.PNG|thumb|250px|ASLT Subscriber Line Board]]
  
===Highlights ===
+
==Highlights ==
 
* Can be used with InterGuard, TouchLine and Pamex stations
 
* Can be used with InterGuard, TouchLine and Pamex stations
 
* Each board provides 6 subscriber connections
 
* Each board provides 6 subscriber connections
Line 13: Line 13:
 
* Red/green/amber LED indicates system status
 
* Red/green/amber LED indicates system status
  
===Installation===
+
==Installation==
  
====AlphaCom XE20/XE26====
+
===AlphaCom XE20/XE26===
 
There are three different subscriber connection methods available:
 
There are three different subscriber connection methods available:
 
*Subscriber connection board ([[Subscriber Connection Board|1009930200]]) with 1.5 m connection cables ([[1009501011]]) or 3.0 m connection cable.
 
*Subscriber connection board ([[Subscriber Connection Board|1009930200]]) with 1.5 m connection cables ([[1009501011]]) or 3.0 m connection cable.
Line 25: Line 25:
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
====AlphaCom XE7====
+
===AlphaCom XE7===
 
All intercom stations are connected by means of pluggable screw terminals on the exchange back-plane. Line points 5 and 6 are by default used as program distribution inputs on line c-d when an ASLT board is placed in board pos. 1.
 
All intercom stations are connected by means of pluggable screw terminals on the exchange back-plane. Line points 5 and 6 are by default used as program distribution inputs on line c-d when an ASLT board is placed in board pos. 1.
  
Line 35: Line 35:
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
====Cabling====
+
===Cabling===
 
Desktop stations are connected to the line on RJ45 wall sockets.
 
Desktop stations are connected to the line on RJ45 wall sockets.
  
===Compatibility===
+
==Compatibility==
 
The four-wire interface provides compatibility with existing standard station range from STENTOFON with the exception of TouchLine display stations produced earlier than March 1995. These stations are no longer compatible due to reduction on the display signal output from the exchange. TouchLine display stations produced after March 1995 are labeled version 1.1 and are fully compatible with the AlphaCom exchange.
 
The four-wire interface provides compatibility with existing standard station range from STENTOFON with the exception of TouchLine display stations produced earlier than March 1995. These stations are no longer compatible due to reduction on the display signal output from the exchange. TouchLine display stations produced after March 1995 are labeled version 1.1 and are fully compatible with the AlphaCom exchange.
  
=== Additional Documentation on Zenitel.com ===
+
== Additional Documentation on Zenitel.com ==
 
* [http://www.zenitel.com/product/aslt Additional Documentation on Zenitel.com]
 
* [http://www.zenitel.com/product/aslt Additional Documentation on Zenitel.com]
  
 
[[Category:Feature boards]]
 
[[Category:Feature boards]]

Revision as of 13:08, 1 March 2018

ASLT Subscriber Line Board

Highlights

  • Can be used with InterGuard, TouchLine and Pamex stations
  • Each board provides 6 subscriber connections
  • 6 RCO remote control outputs (software configurable activation)
  • 1 voice-switched conversation per board
  • When using handset or full duplex conference unit at both ends, the system is non-blocking within each module
  • All subscriber connections suitable for display stations
  • Line monitoring
  • Software-controlled output volume control
  • Hot plug-in/plug-out
  • Red/green/amber LED indicates system status

Installation

AlphaCom XE20/XE26

There are three different subscriber connection methods available:

  • Subscriber connection board (1009930200) with 1.5 m connection cables (1009501011) or 3.0 m connection cable.
2 pcs. of 1009930200 and 1009501011 are included with the E20 and E26 exchange packages.
Station and RCO connection to ASLT in AlphaCom XE20 and XE26


AlphaCom XE7

All intercom stations are connected by means of pluggable screw terminals on the exchange back-plane. Line points 5 and 6 are by default used as program distribution inputs on line c-d when an ASLT board is placed in board pos. 1.

See related article: Physical number 5 and 6 (AlphaCom E7)

The RCO outputs 1-6 are associated with the board in pos. 1, and RCO 7-12 with the board in pos. 2.

Station, program and RCO connection to ASLT in AlphaCom XE7


Cabling

Desktop stations are connected to the line on RJ45 wall sockets.

Compatibility

The four-wire interface provides compatibility with existing standard station range from STENTOFON with the exception of TouchLine display stations produced earlier than March 1995. These stations are no longer compatible due to reduction on the display signal output from the exchange. TouchLine display stations produced after March 1995 are labeled version 1.1 and are fully compatible with the AlphaCom exchange.

Additional Documentation on Zenitel.com