Actions

Difference between revisions of "INCA 2.8 - Release Notes"

From Zenitel Wiki

(Known Issues 2.7.3.0 (GA))
(Known Issues 2.8.2.1 (LA))
Line 27: Line 27:
  
 
==Known Issues 2.8.2.1 (LA)==
 
==Known Issues 2.8.2.1 (LA)==
===MTN-268 Relay follow M-key cannot handle quick M===
+
=== MTN-394 INCA Station does not receive group call audio while speaking into a Simplex Conference===  
Relay configured to follow M-key does not handle quick press on M-key
+
INCA IP Station does not receive group call audio while speaking (M-key pressed) into a Simplex Conference, or if it is a Default Speaker of a SX conference.
  
===MTN-392 Using DAK as C key makes the IP DualDisplay unresponsive for up to 15 seconds===
+
=== MTN-817 IP Video Desktop does not indicate private/open mode===  
In the testing two DAK keys was configured in AlphaPro as "C" and "CTOFF".
+
There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in.
If DAK1 is pressed during idle the station does no respond to key-press or incoming call for about 3 seconds. Calling the station will result in a Camp On Busy. Pressing DAK2 causes the station to not respond for up to 15 seconds.
 
  
===MTN-394 INCA Station does not receive group call audio while speaking into a Simplex Conference===
+
=== MTN-1052 PTT does not work between Gateway and INCA station===  
INCA IP Station does not receive group call audio while speaking (M-key pressed) into a Simplex Conference, or if it is a Default Speaker of a SX conference.
+
Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA.
 +
If call is made between Turbine and Gateway, PTT works as expected.
  
===MTN-408 802.1X config not properly handling special characters in password===
+
=== MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C===  
Character like % is not handled in the password input field for 802.1x.
+
When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode.
  
===MTN-482 Transfer function doesn't work with Cisco CCM===
+
=== MTN-482 Transfer function doesn't work with Cisco CCM===  
 
When the station is used in SIP mode, connected to a Cisco Call manager (version: 9.1.1.21020-1) the permanent call transfer function does not work. When calling the station, we hear a Cisco Call manager message saying that this number is unreachable. In the Cisco station settings the transfer is not activated.
 
When the station is used in SIP mode, connected to a Cisco Call manager (version: 9.1.1.21020-1) the permanent call transfer function does not work. When calling the station, we hear a Cisco Call manager message saying that this number is unreachable. In the Cisco station settings the transfer is not activated.
  
===MTN-598 INCA station fails to register if Hebrew name is too long===
+
=== MTN-598 IP station fails to register if Hebrew name is too long===  
 
More than 12 characters entered causes registration problems
 
More than 12 characters entered causes registration problems
  
===MTN-702 Handset volume cannot be adjusted in Desktop Video Station===
+
=== MTN-268 Relay follow M-key cannot handle quick M===  
The handset volume is not adjusted when using the volume keys on the station, even though it correctly shows the volume bar going up/down in the display. Adjusting handset volume from the StationWeb is OK
+
Relay configured to follow M-key does not handle quick press on M-key
 
 
===MTN-817 IP Video Desktop does not indicate private/open mode===
 
There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in.
 
 
 
===MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C===
 
When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode.
 
 
 
===MTN-948 Hebrew not displayed correctly in Video Desk display===
 
When an AlphaCom system is set to Hebrew language the display in the Video Desk station is not showing Hebrew characters. If station name is written in Latin letters, only 5 or 6 characters are shown. Display is in correct reverse though (right to left).
 
 
 
===MTN-970 LCD screen on IP Video Desktop will dim regardless of settings===
 
The LCD screen on the IP Video Desktop appears to dim, even though the two settings "Time until Activation" and "Time Until Shutdown" under Screensaver category is set to off and never.
 
 
 
===MTN-1052 PTT does not work between Gateway and INCA station===
 
Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA.
 
If call is made between Turbine and Gateway, PTT works as expected.
 
 
 
===MTN-1290 INCA Off-hook tone if digit pressed during tone test===
 
If any digit is pressed or conversation open, it will be mixed with the off-hook tone.
 
  
  
 
[[Category: Release notes]]
 
[[Category: Release notes]]

Revision as of 11:54, 20 March 2018

VSF-INCA 2.8

Release info

Name: VSF-INCA
Description: VSF-INCA is a firmware archive for all INCA based Intercom stations including devices: IP Desktop Master Station, IP Substation, IP Vandal Resistant Station, IPARIO and IP Dual Display Station.
The firmware is delivered in two different ZIP archives:

  • A100G80200.02_08_X_X - Used for standard INCA IP Intercom devices
  • A100G802D0.02_08_X_X - Used for IP Dual Display Station

Version: 02.08.2.1
Date: 20.03.2018
Status: Limited Availability (LA)
Note: Release notes for the Video module component in IP Desktop Station with Video Display (1408001635) can be found in separate document on Vingtor-Stentofon AlphaWiki page IP Desktop with Video Display - Release Notes

New Features 2.8.2.1 (LA)

None

Bugfixes and Improvements 2.8.2.1 (LA)

SNOW-240 StationWeb - inconsistent location of Keyboard Settings page

Renamed the page to "Keyboard Settings" and moved it to SIP Configuration - for Pulse and SIP mode

MTN-408 802.1X config not properly handling special characters in password

Characters like !#$%&/()=@* are now handled in the password input field for 802.1x.

Security fixes and Improvements 2.8.2.1 (LA)

None

Known Issues 2.8.2.1 (LA)

MTN-394 INCA Station does not receive group call audio while speaking into a Simplex Conference

INCA IP Station does not receive group call audio while speaking (M-key pressed) into a Simplex Conference, or if it is a Default Speaker of a SX conference.

MTN-817 IP Video Desktop does not indicate private/open mode

There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in.

MTN-1052 PTT does not work between Gateway and INCA station

Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA. If call is made between Turbine and Gateway, PTT works as expected.

MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C

When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode.

MTN-482 Transfer function doesn't work with Cisco CCM

When the station is used in SIP mode, connected to a Cisco Call manager (version: 9.1.1.21020-1) the permanent call transfer function does not work. When calling the station, we hear a Cisco Call manager message saying that this number is unreachable. In the Cisco station settings the transfer is not activated.

MTN-598 IP station fails to register if Hebrew name is too long

More than 12 characters entered causes registration problems

MTN-268 Relay follow M-key cannot handle quick M

Relay configured to follow M-key does not handle quick press on M-key