Actions

Difference between revisions of "TFIE Indication LEDs"

From Zenitel Wiki

(LEDs on Front Plate)
(LEDs in Function Keys/DAK keys)
Line 10: Line 10:
  
 
== LEDs in Function Keys/DAK keys ==
 
== LEDs in Function Keys/DAK keys ==
 +
When a TFIE station is used in AlphaCom mode, the LEDs in the DAK keys can be controlled from the [[Event Handler]] by using the [[IND|IND command]].
  
 
==Status LEDs on PCB==
 
==Status LEDs on PCB==

Revision as of 08:37, 12 April 2019

LEDs on Front Plate

TFIE Indications 1.PNG


  • Power LED (Green): Steady light when power is OK
  • Fault LED (Yellow): Flashing when the station is not registered/no connection to server
  • Call LED (Red): Steady light during a conversation/call


LEDs in Function Keys/DAK keys

When a TFIE station is used in AlphaCom mode, the LEDs in the DAK keys can be controlled from the Event Handler by using the IND command.

Status LEDs on PCB

TFIE Board Indications 1.png


  • Flashing 2 red + 1 green: Station has no connection to the AlphaCom server/exchange.
  • Flashing 1 red + 2 green: Station connected but NOT registered in the AlphaCom server/exchange.
  • Flashing 3 green Station connected and registered in the AlphaCom server/exchange.


Ethernet Activity & Speed LEDs on PCB

TFIE Board Indications 2.png


Green LED:

  • Steady light: Ethernet connection OK
  • Flashing: Ethernet data traffic
  • No light: No Ethernet connection

Yellow LED:

  • Steady light: 100 Mbit Ethernet connection
  • No light: 10 Mbit Ethernet connection