Difference between revisions of "AMC-IP Board - Replacement procedure"
From Zenitel Wiki
Line 1: | Line 1: | ||
+ | {{A}} | ||
This article gives a short overview how to replace an AMC-IP board. | This article gives a short overview how to replace an AMC-IP board. | ||
[[File:AMC-IP Board STIC position.png|thumb]] | [[File:AMC-IP Board STIC position.png|thumb]] |
Latest revision as of 14:14, 8 October 2019
This article gives a short overview how to replace an AMC-IP board.
- Turn off power to the exchange.
- Remove the faulty AMC-IP board.
- Remove the STIC (STENTOFON Identity Card).
- Insert the STIC in the new AMC-IP board.
- Insert the new AMC-IP board.
- Switch on power.
- Connect a computer to the exchange Eth0 and open a web browser.
- Log on to the exchange by typing in the IP address (default 169.254.1.5) of the exchange in the address field.
- Log in with the default credentials admin/alphaadmin
IF you have a backup follow this procedure:
Restore full Backup from PC
If you do not have a backup:
- Configure IP settings and filters
- Use AlphaPro to upload the customer database
- Reset the server for all settings to take effect