Difference between revisions of "Unlock intercom station with password"
From Zenitel Wiki
Line 17: | Line 17: | ||
'''Event 1''' - Unlock the station by moving the station to COS 1 when dialing passcode 9200. A 10,0 second timer is started. | '''Event 1''' - Unlock the station by moving the station to COS 1 when dialing passcode 9200. A 10,0 second timer is started. | ||
− | + | [[File:Application24a.png|500px|left|thumb|]] | |
− | | | + | <br style="clear:both;" /> |
− | | | + | |
− | + | {{Code2| | |
− | + | [[SET_STATION_COS|$SSC L%1.dir U1]] | |
− | | | + | [[SET_TIMER|$ST L%1.dir W100 L9200]] |
− | + | }} | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
The parameter W100 = 10.0 seconds. Change if required. | The parameter W100 = 10.0 seconds. Change if required. | ||
Line 39: | Line 30: | ||
'''Event 2''' - After the 10 sec timeout, lock the station by moving it to COS 2. | '''Event 2''' - After the 10 sec timeout, lock the station by moving it to COS 2. | ||
− | + | [[File:Application24b.png|500px|left|thumb|]] | |
− | + | <br style="clear:both;" /> | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | {{Code2| | ||
+ | [[SET_STATION_COS|$SSC L%1.dir U2]] | ||
+ | }} | ||
− | Note | + | {{Note| By default all stations are in COS 1, and thereby "Unlocked". To prevent that a SendAll from AlphaPro will "unlock" all stations, it is recommended to "lock" all stations by moving them to COS 2 in the AlphaPro database.}} |
[[File:UnlockCOS2_2.PNG|thumb|left|500px|Put stations in COS 2]] | [[File:UnlockCOS2_2.PNG|thumb|left|500px|Put stations in COS 2]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> |
Latest revision as of 08:04, 1 June 2022
This article describes how a master station can be locked in idle, and unlocked by dialing a passcode. When the code is dialed, the station will be unlocked for a preset periode of time, then it will automatically be locked again.
The passcode is an Event Trigger number. When dialed it will move the station to a COS (Class of Service) in which all wanted features are enabled. Also a timer is started. When the timer expires, the station will be moved to a COS were all features are disabled, except the event trigger feature itself.
- In AlphaPro - Directory & Features, Insert a new event trigger directory number with feature number 85, e.g. 9200.
- In AlphaPro - COS, modify COS 2 to include feature 85 only.
- Program two new events in the Event Handler.
In AlphaPro, select Exchange & System - > Events, and Insert two events with the following properties:
Event 1 - Unlock the station by moving the station to COS 1 when dialing passcode 9200. A 10,0 second timer is started.
Action commands:
The parameter W100 = 10.0 seconds. Change if required.
Event 2 - After the 10 sec timeout, lock the station by moving it to COS 2.
Action commands: