Actions

Difference between revisions of "ELSIR-10C"

From Zenitel Wiki

(Restore Factory Defaults and Software Upgrade)
(Configuration)
Line 9: Line 9:
  
 
* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
 
* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
*[[Adding station to existing system (Edge)|Edge mode]]
+
* [[Adding station to existing system (Edge)|Edge mode]]
*[[SIP Intercom Configuration|SIP mode]]
+
* [[SIP Intercom - Web Interface|SIP mode]]
*[[IP Station Configuration - Pulse mode|Pulse mode]]
+
* [[IP Station Configuration - Pulse mode|Pulse mode]]
  
 
==Restore Factory Defaults and Software Upgrade==
 
==Restore Factory Defaults and Software Upgrade==

Revision as of 13:38, 30 June 2022

AEIPS.png
Turbine IP Speaker
(1023300010)

Getting started

Configuration

The loudspeaker can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure.

Restore Factory Defaults and Software Upgrade

The ELSIR-10C IP Speaker has a Turbine kit TKIS-2 inside.

Connectors, Indicators and Dimensions

The ELSIR-10C IP Speaker has a Turbine kit TKIS-2 inside.

Software Requirements

This station is fully supported as from AlphaCom version 11.2.3.7

Related Information