Actions

Difference between revisions of "ENA2100 Status LEDs"

From Zenitel Wiki

Line 12: Line 12:
 
* '''VU 2''': This Green and Red LED is lit when there is audio activity on loudspeaker channel 2
 
* '''VU 2''': This Green and Red LED is lit when there is audio activity on loudspeaker channel 2
  
[[Category: Public Address - Features and configuration]]
+
[[Category: Public Address - Network amplifiers]]

Revision as of 12:17, 6 July 2022

AlphaCom icon 300px.png

The ENA2100-AC Amplifier has status LED indicators in the front panel:

ENA2100 - Status LEDs


  • Power: Steady green light when the amplifier is powered on
  • Status: When the amplifier is operational, the LED is flashing green. The LED will be steady lit during the startup sequence
  • Fault: The Yellow fault LED will be lit whenever the amplifier detects an error. Which errors to report is configurable. See ENA Amplifier - Monitoring. The Fault LED is lit during the startup sequence
  • Disabled: This Yellow LED will be lit if the loudspeaker output channels are disabled (From Web: Amplifier Settings > Line Control > Lines Enabled: Uncheck)
  • VU 1: This Green and Red LED is lit when there is audio activity on loudspeaker channel 1
  • VU 2: This Green and Red LED is lit when there is audio activity on loudspeaker channel 2