Difference between revisions of "Call Requester Mode (Event Type)"
From Zenitel Wiki
(→Event description) |
|||
Line 11: | Line 11: | ||
|'''When change to ON''': || When the station has made a [[Call Request]] | |'''When change to ON''': || When the station has made a [[Call Request]] | ||
|- | |- | ||
− | |'''When change to OFF''': || When Call Requester mode has been left (because the call | + | |'''When change to OFF''': || When Call Requester mode has been left (because the call was answered, the queue entry was deleted, timeout, or a station key was pressed) |
|- | |- | ||
|'''When related to''': || The queuing station | |'''When related to''': || The queuing station |
Revision as of 00:22, 6 November 2007
Event description
Event Owner: | The calling station or an UDP group |
Event type: | 11 - Call Requester mode |
Subevent: | N/A |
When change to ON: | When the station has made a Call Request |
When change to OFF: | When Call Requester mode has been left (because the call was answered, the queue entry was deleted, timeout, or a station key was pressed) |
When related to: | The queuing station |
Event description
Event Owner: | the calling station |
---|---|
Event type: | 11 - Call Requester Mode |
Sub-Event: | N/A |
When Change to ON: | When this station dials a Call Request, which sends a mail to another station's mail queue. The event goes ON when the station has been put into the queue |
When Change to OFF: | When the queue entry is deleted, pr the station has been used for something |
When Related to: | the queuing station |
- Additional information:
- - The event is active while the station has voice message/flash/ringing
- Application
- - Additional lamp indication of call (outside cells etc.)