Difference between revisions of "IND - Indicator control for CRMIV LEDs, buzzer etc."
From Zenitel Wiki
(→Syntax) |
(→Syntax) |
||
Line 5: | Line 5: | ||
'''phys.no''': 1-552 = The physical connection for the CRM IV station you are programming <br> | '''phys.no''': 1-552 = The physical connection for the CRM IV station you are programming <br> | ||
+ | |||
+ | |||
'''key.no''': 1-100 = Single-touch keys See drawing on the next page for details<br> | '''key.no''': 1-100 = Single-touch keys See drawing on the next page for details<br> | ||
1023 = Buzzer | 1023 = Buzzer | ||
1024 = Display | 1024 = Display | ||
+ | |||
'''led.no''': Single-touch keys Buzzer Display<br> | '''led.no''': Single-touch keys Buzzer Display<br> | ||
1 = Red LED 1 = Internal buzzer 1 = Backlight | 1 = Red LED 1 = Internal buzzer 1 = Backlight | ||
2 = Green LED 2 = External buzzer (relay) | 2 = Green LED 2 = External buzzer (relay) | ||
+ | |||
'''ind-type''': LEDs and display: Buzzers | '''ind-type''': LEDs and display: Buzzers | ||
1 = continuous (low priority) 1 = 1 bleep per 8 seconds (low priority) | 1 = continuous (low priority) 1 = 1 bleep per 8 seconds (low priority) | ||
Line 17: | Line 21: | ||
4 = continuous (alarm priority) | 4 = continuous (alarm priority) | ||
See “multiple LED functions” below. | See “multiple LED functions” below. | ||
+ | |||
+ | |||
[state] OFF or ON (capital letters) | [state] OFF or ON (capital letters) | ||
The brackets [ ] indicate that this command is optional. | The brackets [ ] indicate that this command is optional. |
Revision as of 02:03, 10 November 2007
Syntax
IND <phys.no> <key.no> <led.no/buzzer> <ind-type> [ON/OFF]
phys.no: 1-552 = The physical connection for the CRM IV station you are programming
key.no: 1-100 = Single-touch keys See drawing on the next page for details
1023 = Buzzer
1024 = Display
led.no: Single-touch keys Buzzer Display
1 = Red LED 1 = Internal buzzer 1 = Backlight
2 = Green LED 2 = External buzzer (relay)
ind-type: LEDs and display: Buzzers 1 = continuous (low priority) 1 = 1 bleep per 8 seconds (low priority) 2 = slow flash (medium priority) 2 = 1 bleep per 2 seconds (medium priority) 3 = fast flash (high priority) 3 = 4 bleeps per second (high priority) 4 = continuous (alarm priority) See “multiple LED functions” below.
[state] OFF or ON (capital letters)
The brackets [ ] indicate that this command is optional.
If nothing is entered in this field, the indication is switched on/off along with the event.
By entering OFF, for example, you can set an indication to turn off when the event
turns on.
Example
IND 2 23 2 3 ON – Station 2, key 23, turn green led, fast flashing, ON