IP Substation Kit - 1008090200
From Zenitel Wiki
Contents
- 1 Highlights
- 2 InterCom connections
- 3 Configuration
- 4 Software Upgrade
- 5 PCB LED Indications
- 6 Dimensions
- 7 Reset to factory settings
- 8 Board Connectors
- 9 Additional Documentation on Zenitel.com
- 10 Related Articles
- 11 Connections
- 12 Configuration
- 13 Advanced Network Settings
- 14 Restore Factory Defaults and Software Upgrade
- 15 Connectors, Indicators and Dimensions
- 16 Accessories
- 17 Related information
Highlights
- Compatible with Vingtor-Stentofon AlphaCom, Vingtor-Stentofon Pulse and iPBXs (SIP)
- Enables manufacturing of custom made IP substations
- Integrated data switch with advanced networking and security functions
- Supports digital inputs and output via built-in relay
- Powered from the IP network cable using Power over Ethernet (PoE)
InterCom connections
Configuration
- IP Station Configuration
- VLAN (IEEE 8021Q)
- Network Access Control (802.1X)
- Noise Reduction
- Voice Activity Detection (VAD)
Software Upgrade
PCB LED Indications
Dimensions
Reset to factory settings
Board Connectors
Additional Documentation on Zenitel.com
Related Articles
- IP Substation - Amplified calling
- Mounting and Assembly Kit for IP Substation - 1008091000
- IP SubStations, Acoustical design
- IP Station License
Connections
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
- IP Station Configuration - AlphaCom mode
- IP Station Configuration - SIP mode
- IP Station Configuration - Pulse mode